|
#1
|
|||
|
|||
KF2 Spares
HI,
I ordered recently a kf2 to have something different in my country (Turkey) I won't have any local support at least for a while so should stock some spares to end up the races. I race only 13.5t superstock on a tight indoor carpet track with medium grip level. -My budget is limited so I should buy as few as possible spare parts. I assume Wishbones, hubs (don't know ıf I would need all 3 of them ?) rod ends are must have. What about front shock shafts, hinge pins, front bulkhead , belt or any other parts ? -For setup I will order 5 degree yokes and some springs but don't know which springs should I have for my conditions described above . I'm totally unfamiliar with the car and brand |
#2
|
||||
|
||||
Hi
The first thing to buy are the 5 degree alloy yokes. These are a must have item. Front wishbones Front hubs Rear wishbones I have not broken much on the KF. My personal list of spares would include: Spur gear Belt Front and rear shock towers Front wishbone pivot pins inner and outer. I hope this helps
__________________
2014 & 2013 BRCA 4WD 1/10 Off Road Southwest Regional Champion 1998 BRCA 1/10 IC Circuit British Champion www.racing-cars.com/ WWW.WESTCOUNTRYRESORTS.CO.UK WWW.TRCMCC.CO.UK |
#3
|
||||
|
||||
I and I know a few others have broken front axles
|
#4
|
||||
|
||||
There does seem to be a problem with the manufacturing on the KF2 front axle. I had one shear off completely by just turning into a corner! Fair play to Schumacher who sent me out some replacement axles (from the KF) free of charge.
Chris
__________________
PR Racing - Insidelinemodels - RC Concept - LMR - BMM Racing - MB Models |
#5
|
|||
|
|||
I'll try to put some other brand Cars (yokomo or Team c) front axles in first built, they will fit ok İ think
|
Thread Tools | |
Display Modes | |
|
|