WANTED X6 SETUP

alexb4 · #1 03-09-2009

I NEED A X6 SETUP SHEET FOR SOMEWHERE LIKE BATLEY FOR A STANDARD X6

YoungChazz · #2 03-09-2009

Alex, I'll let The Boyz correct me if I'm wrong. I'm in marketing, not engineering!

I think the standard U.K. set-up for the Squared posted now on our new site is based on the famous Ellis Oz set-up. That was an original X - 6, and it still is the base point for most U.K. tracks. I think the weight is shifted around a bit for the Squared, but it's fairly close.

Lee · #3 03-09-2009

Very true Chazz,

If you take the squared standard UK setup not only will you be nearly there setup wise, you will be a very happy bunny too.

Just make sure you copy it all and not take bits from here and there, all settings are there for a reason

super__dan · #4 03-09-2009

I run mine the same at Batley as everywhere else as a starting point which is essentially Ellis starting setup which is in the sticky section.

You know Batley was the first track the X6 ever got ran on in the UK, Chris and I got our kits 10 days before the national and had 1 friday there for some initial testing. Things have come a long way since then

Paul_Sinclair · #5 03-09-2009

Quote:

Originally Posted by super__dan

You know Batley was the first track the X6 ever got ran on in the UK, Chris and I got our kits 10 days before the national and had 1 friday there for some initial testing. Things have come a long way since then

I still look at this gallery from time to time with a sense of nostalgia: http://www.oople.com/rc/photos/x6/