Lazer zxr

[Kyosho_fan]

Hi all,

I don't know what you think about, but I would suggest to not let make any parts for gearboxes for ZXS. Once everyone can make any ZXS it will decrease the value of the car both in price, dreams and collectionvalue.

If we go this path, we follow tamiya with all the rerelease's and the devaluation of all the collections out there.

Just my 2 cents, and something to think about.

Greetz

[zaccopelle]

Originally Posted by Kyosho_fan

Hi all,

I don't know what you think about, but I would suggest to not let make any parts for gearboxes for ZXS. Once everyone can make any ZXS it will decrease the value of the car both in price, dreams and collectionvalue.

If we go this path, we follow tamiya with all the rerelease's and the devaluation of all the collections out there.

Just my 2 cents, and something to think about.

Greetz

Something to consider ofcorse

[Welshy40]

Originally Posted by zaccopelle

Something to consider ofcorse

I agree for this model, as I hate to say it but was only suited for dust and clay tracks and was awful on high grip.

However the ZX and ZXR I dont as this is what I set out to achieve so wecall could still buy the bits and enjoy these great cars like I did, flat out and on the edge. All flat bits through Fibrelyte, belts now via ebay, bodyshells Kamtec and ebay, 3d prints via Alcyon and others via Shapeways and the list goes on.

[Kyosho_fan]

Originally Posted by Welshy40

I agree for this model, as I hate to say it but was only suited for dust and clay tracks and was awful on high grip.

However the ZX and ZXR I dont as this is what I set out to achieve so wecall could still buy the bits and enjoy these great cars like I did, flat out and on the edge. All flat bits through Fibrelyte, belts now via ebay, bodyshells Kamtec and ebay, 3d prints via Alcyon and others via Shapeways and the list goes on.

Yes for the ZX and ZXR it would be great
I would really like an affordable slipper system like the ZXR. Even the B4 system is a bit overpriced to race. And some affordable nylon arms

Does anybody what spurgears fit on the lazer ZXRR? I've seen several brands gone to 98T in 48dp so that would actually work. But don't know if the center hole and the screw holes fit...

[isobarik]

Originally Posted by Kyosho_fan

Yes for the ZX and ZXR it would be great
I would really like an affordable slipper system like the ZXR. Even the B4 system is a bit overpriced to race. And some affordable nylon arms

Does anybody what spurgears fit on the lazer ZXRR? I've seen several brands gone to 98T in 48dp so that would actually work. But don't know if the center hole and the screw holes fit...

Law 12 la-2 88 tootha o.5 module TM-7 100 tooth 48 pitch

I think the center hole is 8mm

[Kyosho_fan]

Originally Posted by isobarik

Law 12 la-2 88 tootha o.5 module TM-7 100 tooth 48 pitch

I think the center hole is 8mm

Hi yes i know that thanks. I was asking for other brands hat might fit. Like Robinson or kimbrough. Even maybe yeah racing or one of the asian brands

[Welshy40]

Originally Posted by Kyosho_fan

Hi yes i know that thanks. I was asking for other brands hat might fit. Like Robinson or kimbrough. Even maybe yeah racing or one of the asian brands

RW Racing do a 100t b4 spur gear for me when using the alcyon layshaft and vts slipper clutch. Costs not too much but what you get is an extra lap or two and that is the truth.

[Welshy40]

Some pictures of a ZXR with option house on front and associated rear, Mike Dunns car, plus losi shocks on a few ZXS and thought id throw in a few more plus pay attention to the worlds A line up as two were losi drivers so had losi shocks on their cars. Question is can you guess the Kyosho team driver on his own as for some wouldnt think it possible ?

[isobarik]

Gil losi

Mvh ISO

[Welshy40]

Originally Posted by isobarik

Gil losi

Mvh ISO

You win a prize, a smack on the back of your head

[isobarik]

Tanks

Lovley Derek furantani his car look awsome

lovley pictures paint job from the nitees looks awsome.

Think i have to make an copy

Mvh isobarik

[isobarik]

Welsh like the zxs gearbox just 2 sides and 2 ears on the top to screw in the front stock tower.
And an kick up plate should be awsome new top dock and front shocktower is needed
Mvh isobarik

[Welshy40]

Originally Posted by isobarik

Welsh like the zxs gearbox just 2 sides and 2 ears on the top to screw in the front stock tower.
And an kick up plate should be awsome new top dock and front shocktower is needed
Mvh isobarik

? Unsure what exactly your on about.

[HKS_TRD]

Originally Posted by Welshy40

? Unsure what exactly your on about.

I think he is talking about a design for the ZXR front gearbox

[Welshy40]

Iso, ive tested kick up plates for the zxr as your aware plus did a three piece chassis on a broken tub and it didnt agree with the ZXR design.

It made the car worse plus the flex in the plate made the gearbox crack, basically did exactly the same as the zxs, with exception the zxs materials were cheap crap.

[Checa]

Originally Posted by alcyon

1.Place bearing on the shaft
2.Insert into gearbox
3.Insert pulley from inner end into spline slots
4. Insert the thrust bearings
5. Secure the circlip

I have just bought one of these layshafts but im unsure what thrust bearing is used anyone know the part number

[Welshy40]

Originally Posted by Checa

I have just bought one of these layshafts but im unsure what thrust bearing is used anyone know the part number

Its the bearing that goes between the two pulleys, you can get away with a bearing instead of the thrust. Parts listed on the zx manual.

[isobarik]

Originally Posted by Welshy40

Iso, ive tested kick up plates for the zxr as your aware plus did a three piece chassis on a broken tub and it didnt agree with the ZXR design.

It made the car worse plus the flex in the plate made the gearbox crack, basically did exactly the same as the zxs, with exception the zxs materials were cheap crap.

hm maybe ill put an zxs front end to an zxr that would be sweet.

mvh iso

[Ubiquitous]

Originally Posted by Kyosho_fan

Yes for the ZX and ZXR it would be great
I would really like an affordable slipper system like the ZXR. Even the B4 system is a bit overpriced to race. And some affordable nylon arms

Does anybody what spurgears fit on the lazer ZXRR? I've seen several brands gone to 98T in 48dp so that would actually work. But don't know if the center hole and the screw holes fit...

If that helps, the Schumacher U4185 98T Spur Gear + U3364 slipper pads is a direct fit for the ZXR slipper.

Ubi

[Kyosho_fan]

Originally Posted by Ubiquitous

If that helps, the Schumacher U4185 98T Spur Gear + U3364 slipper pads is a direct fit for the ZXR slipper.

Ubi

Ohw that would be great. schumacher new is a lot cheaper then vintage kyosho