|
#1
|
|||
|
|||
Xb4 2014 setup
Evening guys an girls
I've just got me self the new xray after running dex410 since I started off road was looking for some setup tips on the xray for astro I've put the same oils in as I would use in dex410 However there's only 1.2 6 hole so I put them in with 40wt f 30 r Used 10,000 front 5,000 rear as supplied The cars is at kit settings as it's not turned a wheel yet fitted the progressive springs back an front I have the stiffer roll bars 3 marks and 4 marks Any tips are help would be appreciated Tnx Sirslidealot |
#2
|
|||
|
|||
Quote:
If you start with the carpet set up from the instructions you will not be far off a dry astro set up. If its wet though you will have to change it slightly. |
#3
|
|||
|
|||
Search for Xray forum on google there is a astro setup on there from TELFORD track. Might be a good starting point
http://forum.teamxray.com/xform/inde...=136&setup=xb4 |
#4
|
|||
|
|||
Search for Xray forum on google there is a astro setup on there from TELFORD track. Might be a good starting point
http://forum.teamxray.com/xform/inde...=136&setup=xb4 |
|
|