|
#1
|
||||
|
||||
Spares - what to carry?
Just looking to see if there is anything that is commonly needed for an SV2.
I know from running the SV a few years ago these cars are solid, however just thought to ask before putting an order in. |
#2
|
|||
|
|||
Front Bulkhead. Think the SVR bulkhead is beefed up, U4094.
|
#3
|
||||
|
||||
Definitely agree on the front bulkhead, get a few of the SVR type and keep in stock. I've broken a couple of hubs after clipping the piping hard so that's another part id recommend. I've managed to rip the turnbuckle out of the front caster blocks also, I bit the bullet in the end and got some aluminium ones which have been great.
All in all the car is fairly tough but I would say these are the weak points. Chris |
#4
|
|||
|
|||
Also, front upper outer link ball end. I have had one split. Svr ones are also beefed up.
|
#5
|
||||
|
||||
Front yokes get ally ones
Front steering arms get ally ones Front arms And never broke on sv2 but have on sx turn buckles And spurs Thats about it i have broke and they are the only spares i keep |
#6
|
||||
|
||||
Also Paul
If you are going to run an alloy servo horn get a spare steering rack
__________________
Wots up doc |
#7
|
||||
|
||||
Front bulkhead - is that the small peice on the front or the full bulkhead that attaches to the chassis?
|
#8
|
||||
|
||||
Only thing i have broke on the car is the castor block,but now on ali ones,i would carry the screws that hold the wheels on
__________________
RC OCTANE Schumacher Cougar LD2 Lrp Eds Sworkz 35-4n Alpha dragon |
#9
|
||||
|
||||
The part the front shock tower attaches to m8
__________________
Wots up doc |
|
|