high front low rear hingpin height

[dwp102]

What is the net effect of this when keeping the anti squat angle the same? In theory and from people who hqve have tried it back to back? Thanks

[gazhillAE]

It's an Inbetween setup
Instead of running fully up for more traction or fully down for less traction and more rotation in the corners, this is a middle setting kind of an Inbetween for both!

Gaz

[Andywoods]

Originally Posted by gazhillAE

It's an Inbetween setup
Instead of running fully up for more traction or fully down for less traction and more rotation in the corners, this is a middle setting kind of an Inbetween for both!

Gaz

So if both were in high position you get more rear grip? What do you run in low and high grip gaz cos ive just gone with this in between setup and not happy with it, cheers

[dwp102]

Why arent you happy with it andy?

[bigred5765]

Originally Posted by gazhillAE

It's an In between setup
Instead of running fully up for more traction or fully down for less traction and more rotation in the corners, this is a middle setting kind of an In between for both!

Gaz

if your running same anti squat as low position and run rear low and front high to get high front to same anti squat position you'll have to drop it back down to same height as running it low so this in between cant do anything as roll centre's will be in same position

[bobbin]

read Simon moss K1 setup, that's the reasoning behind the pin placement.
http://www.petitrc.com/setup/schumac...rksop20130127/

[gazhillAE]

Originally Posted by Andywoods

So if both were in high position you get more rear grip? What do you run in low and high grip gaz cos ive just gone with this in between setup and not happy with it, cheers

What don't you like ?
If you want more rotation try all bottom holes and about 2mm at rear for antisquat.
See you Sunday if you're there

[danmurphy]

My understanding is you can run the same anti squat but alter the roll centre and centre of gravity

[gazhillAE]

Originally Posted by danmurphy

My understanding is you can run the same anti squat but alter the roll centre and centre of gravity

Yes!
Same anti squat but the washers change and go in diff places