|
#61
|
||||
|
||||
Mine for 2011
__________________
'There are two choices in life-Take it or leave it !' Yokomo - Nemoracing Sb Designs http://www.fairfueluk.com/ Last edited by cmgreen; 03-05-2011 at 06:48 AM. Reason: pic |
#62
|
|||
|
|||
Quote:
|
#63
|
||||
|
||||
Yes on friday i can post a pic. Will get the shell on thursday at the guy who did the paintjob.
|
#64
|
||||
|
||||
The body was not easy to cut when there are no good lines to cut for. I cut the bottom edge too high. The fit was not quite 100% in front on the 8 mm longer chassi.
A new undertray will be purchased. DSC00238.jpg DSC00245.jpg DSC00247.jpg DSC00249.jpg DSC00246.jpg DSC00248.jpg DSC00250.jpg DSC00251.jpg |
#65
|
||||
|
||||
Does this shell have the cut lines moulded into it?
__________________
Team Associated B44FT ~ LRP SXX TC Spec ~ LRP Vector X12 6.5t ~ Savox SC-1251MG ~ Spektrum DX3S Schumacher Cougar SV Pro ~ LRP Sphere TC Spec ~ Losi Xcelorin 6.5t ~ Savox SC-1257 ~ Spektrum SR3100 ~ Spektrum DX3S In progress: Team Durango DEX410 V1-V4 hybrid ~ DESC410V2 ~ DEX210 |
#66
|
|||
|
|||
Yes it does, but only for the stock chassis, if you're fitting it to the LWB chassis you will need to cut the shell longer and then trim to fit.
It doesn't have the lower cut line tho, so peeps can mount it higher if necessary. The shell can easily be trimmed for hight after mounting to the chassis ... Hope that helps |
|
|