|
#81
|
||||
|
||||
Just got my chassis protectors from Jon at RCS, good match for my paint job.
I've fitted a set of titanium screws and I've changed to long steering turnbuckle for a titanium one out of the XX4, the ball studs for the standard turnbuckle are imperial and mine had a load of slop with the kit rod ends, XX4 turnbuckle with a pair of new RPM rod ends are a direct fit and have zero slop. |
#82
|
||||
|
||||
May be caus' abstraction is dead in this (RC) world!
|
#83
|
||||
|
||||
My new 22-4 in McLaren test orange
|
#84
|
||||
|
||||
No body shot at the moment.
|
#85
|
|||
|
|||
|
#86
|
||||
|
||||
Incredibly tidy wiring frefon
|
#87
|
|||
|
|||
thanks
|
#88
|
||||
|
||||
Nice and clean wiring. Remember seeing it on #22 Empire. Are those carbon tabs holding down the motor wires on an angle? I tried doing something similar to mine.
|
#89
|
|||
|
|||
yes, it keeps the cables to the central belt cover.
On the left side (rear) we must add a washer 2mm under the tab it allowed more horizontal corners are rounded to avoid cutting cables |
#90
|
||||
|
||||
Thought Id get involved
|
#91
|
||||
|
||||
|
#92
|
||||
|
||||
Ive ordered some blingy Exotek parts and a new cab forward shell watch this space
|
#93
|
|||
|
|||
Really nice car to drive. The shorty setup and shocks in front of rear wishbones transform the car. Shame not many people still run these
|
#94
|
||||
|
||||
Rear camber link mod I made the other day with 3 extra lower holes.
|
#95
|
||||
|
||||
Unfortunately because you have machined the camber mount it WILL break, when we did this at the beginning of last year we had the same problem, just mount it directly on top of the Un-machined camber block.
__________________
TLR, Screwz4RC, Spektrum, Horizon Hobby, Trinity, Trishbits, Racer, RichPaint, RDT products, Sanwa, Zen Racing, Silverback Lipo's http://www.screwz4rc.co.uk My Trader Feedback - http://www.oople.com/forums/showthre...hlight=tyreman
|
#96
|
|||
|
|||
don't have all of the electronics yet but new body and wing
|
#97
|
|||
|
|||
My 22 2.0 and 22-4
Guys,
Finally got my painted shells on my 22 2.0 and 22-4. Both using Hobby wing ESC and spektrum servo and receivers. Thanks to Alex at Moss Models for sorting the shells being painted and help. Also cheers to everyone else for there help etc. Cheers Lee
__________________
Lee Willows Moss Models Garcia Graphix Last edited by lee.willows; 30-07-2018 at 04:24 PM. |
#98
|
||||
|
||||
Hi,
Here are two quick pictures of my TLR 22-4
__________________
Team KBracing Konrad Berger Denmark Push the limits of PERFORMANCE with Team KBRacing MCD W5XL RN Tuning / R1 29ccm. Nano-tech Lipos. ST. JX servo. TH. JX servo. Sanwa MT-44 Radio. |
#99
|
|||
|
|||
22-4
My losi 22-48
|
Thread Tools | |
Display Modes | |
|
|