Vampire SR1+ Esc manual or setup help

[jjimbobb]

Hi, just wondering if anyone out there has a manual for this esc they could show me or send a picture/copy of?

Bought it in a joblot without instructions and it seems like a good unit but can’t program it properly as I can’t find a manual anywhere!

If not does anyone have experience with one they would be willing to share? I’ve figured out how to program the transmitter but need to know the menu sequence/parameters for setting everything else....

Thanks in advance

James.

[jon kedge]

I've got one,what you need to know...

[laco]

pls, could you help me?
could you provide me the scan of manual for this ESC?
many thanks for your help!

[Steven Forster]

Inbox me your email addresses and I will take pics and send them to you 🙂

[laco]

Hi Steven
I try to send you a private message, but I'm not sure if you received it. I don't have it in sent messages. So, for sure, my email is: v.fritsch@seznam.cz
Thanks a lot for your help!
Vladimir

[laco]

Steven, pls, confirm me, if you have received my answer to private message - I still don't have any message in sent folder...

[gnu156]

Originally Posted by jon kedge

I've got one,what you need to know...

Hi John,

Can you remind me how to calibrate this esc, i've an old one and i'm not sure it's still working

cheers

[chris24jt]

turn on everything - set all trims on throttle to centre

press and hold 'set' button for 3 seconds - it will beep
leave throttle centred and press set once - 1 beep
push and hold full throttle and press set once - 2 beeps
push and hol full brake and press set once - few beeps and then both lights should then be lit up and you are good to go...

[EclipseCGI]

I have a SR1+ manual if you need any pics to help with the esc setup.

[gnu156]

thanks, that's what I thought. I have done so get all the beeps but seemingly no power to motor although steering servo is working ok