Go Back   oOple.com Forums > Car Talk > General Car Talk

Reply
 
Thread Tools Display Modes
  #1  
Old 22-09-2018
Rizla Rizla is offline
New Member
 
Join Date: Sep 2018
Posts: 3
Default Running out of distance

Hi all new to this we have just fitted a new brushless motor in our absima car everything works apart from the distance do you have to tune anything in . Before the car would be at the end off the car park and you’d still be able to drive it not it s only getting 10/20 metres and stops till you walk towards it

Last edited by Rizla; 22-09-2018 at 04:12 PM.
Reply With Quote
  #2  
Old 22-09-2018
Navek668's Avatar
Navek668 Navek668 is offline
Member
 
Join Date: Mar 2016
Location: Bolton
Posts: 97
Default

Possible damage to the end of the aerial on the receiver, should have about 1/2 inch of white end showing, I have had a similar issue when I used an etronix tx and rx and part of the little white end snapped off reduced the distance massively, worth checking???
__________________
Schumacher Cat L1 Evo
Schumacher Cougar Laydown
Schumacher Cat L1
Schumacher Cat K2
Schumacher KF2
Tamiya DF03 Dark Impact
Tamiya TB04
Vintage Tamiya TL01 Baja Champ
Vintage Tamiya Striker
Reply With Quote
  #3  
Old 22-09-2018
Rizla Rizla is offline
New Member
 
Join Date: Sep 2018
Posts: 3
Default

I’ll check
Reply With Quote
  #4  
Old 22-09-2018
Ashlandchris's Avatar
Ashlandchris Ashlandchris is offline
Mad Member
 
Join Date: Mar 2014
Location: Mirfield
Posts: 1,201
Default

I had an Absima CR4T Tx/Rx which did similar. I contacted Absima and thy were brilliant and replaced it. All sorted, but not sure what the problem was mind you
__________________
I've got Araldite and a Swiss Army Knife - what more do I need?


Yokomo YZ-2

No 4WD because nothing lives up to my original Optima. Until now maybe?...
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 11:11 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
oOple.com