FOR SALE Clearout, b4, mardave, mi3.3/4lp, radio, batts, tyre warmers

[Buck_Rodgers]

Hi guys, i’m having a massive clear-out of my RC car stuff.

Schumacher MI3/3.5 Boxed with Manual



The car i’ve been using for some time now.Its in pretty good condition.
Its running a spool, RPM ballcups, grey front belt, black rear. Blue front springs, white on rear. Few other bits and bobs here and there. Currently has a decent set of Sorex 28R’s. Has a Speed6 shell (has a slight crack by the LH light sticker), nice smooth diff, 89t (48dp) spur.

It comes in used condition and has been used indoors and outdoors, so has scuffs etc on the bottom.

This car is still very competitive. And in the right hands can easily keep up with the newer touring cars. You can still buy spares for it and will be able to for a while yet. Good thing with a lot of Schumy cars is that parts can often carry over between models, so a lot of the newer parts can be retro fitted (plus Schumacher keeps stock of older parts themselves).

The reason for sale?
Simply I have a rather busy Job and don’t always have the time for this anymore. Shame, but hey ho.
Plus I think i’d prefer the cash at the moment to put towards a Mac (as I really fancy one of those)

It comes with



Mi3 Manual
BNIP Spares

C/F 2008 Flex top Deck - U3274
Alloy Top Link Mount - U3133
C/F Lipo Locator - U3271
Diff Washer – Pro Spec - U3140
Wishbones Rear - U3128
Pro-diff screw set - U2573
RW racing Spur geat 48dp 89t - RW48M
M3 nyloc nut x8 -U2187

Opened but not used
2x new Body posts (1used) - U2480
Susp Pivot Blocks MI4 - U3494

Used Spares
6 white shock springs -
3 spare Chassis
Spare set of Shocks
Spare Bulkheads Front and rear
4 C/F Short top decks
2 C/F Long top decks Mi2
2 C/F Front Shock bracket
3 C/F rear shock brackets
1deg Alloy rear hub carrier - U2741
2 front belts (black)
2 rear belts (black)
1 rear belt (grey)
1 Purple spur 48dp 70t
4 C/F front wishbones
8 C/F rear wishbones
1 4/L deg front hub carrier
3 plastic 0 deg hub carriers
4 2 deg c hub yokes - U2736
4 front hubs - U2990
2 alloy post blocks (w/posts) - U3159
Track rods x 8 (think its full set +1) - U3135
Rear Diff (needs a rebuild)
1 Way
3 Spools (outdrive on the one side a Little bashed up, useable. 1 with unsuseable outdrives, the third with only one outdrive, which is also damaged)
Spur 64p 90t
Servo saver - U2882
3x Alloy eccentric - U3123
4 x drive washers (2xmi2, 2 x mi4 l/w) -
4 driveshafts mi4 (1 needs pin) - U3511
3 driveshafts black steel
4 driveshafts steel (1 uj slightly damaged 2 damaged)
1 purple driveshaft.
Yoke pivot pins 2upper 1 lower - U2664
8 alloy block pivot -U3130
7 Alloy Block -U3129
4 Alloy top link mount - U3133
Diff retaining post - U3124
9 CSK washers - U2988
4 55mm pivot pin - U3142
2 pivot pins (can’t find calliper)
6 Ti turnbuckles
Some Qwik clips
Some bearings (can’t find calliper at the moment)

This Will also come with an Mi4LP chassis, to which you could add some of the parts on the 3/3,5 to make up a 4 if you so desired
On the Mi4 already are 2 diffs and another black front belt
Alloy motor clamp Mi4 - U3505 New but opened packaging
Mi4 alloy centre point steering

Electrics included are

Hobbywing XERUN 120a 1s Speed Controller & Lcd program box -
Fully upgradeable firmware (use speed passion or Hobbywing)
-Been used in my Mardave (also for sale) as well as the 3.5

Team Epic Duo2 13.5 purple alloy motor cooler on top -
-been used in my Mardave (also for sale) as well as the 3.5

Futaba S9551 Coreless digital Servo -

Nosram Motor Fan

Wheels/tyres suitable for practice
Sorex 32x 1 set, sorex 36x 2sets, Vtec 30x2sets + 2 sets of GRP foam tyres, indivual 28, individual 32, 1 pair of vtec 30’s, set of 3 (1 got damaged) 28r





If you were to buy all this new (assuming you could still buy and Mi3/3.5 new) it’d cost an absolute fortune, now I realise the car is some years old. There is plenty to keep you going there for ages!






I’m after £220 + buyer pays fees and postage (we can arrange whatever you like postage wise and will cost accordingly)







Mardave V12



Started out life as a VRX kit, but almost everything has been changed on it at some point (as the silver/grey compound plastics weren’t to my liking. Only place I found them to work well on the car was the front wishbones and steering arms as they didn’t flex quite so much.

The original Blue vrx chassis is around somewhere (probably my parents garage) but i replaced it with the purple anodised one as thought it looked the tits.

Included with the car is

Orange Vauxhall Calibre shell, Few cracks. Will keep you going for now (buy a GT2 shell, much better, tough as anything, only reason i got the calibre is the model shop had no GT2’s)
Tyres on it Pink meds rear, Jap med fronts (some life left in them)
Purple aerial mount
Hard (black) spring on the front soft on the rear (plain metal)
Camber adjusted with a 2mm washer on leading end of wishbone
Sprung servo horn 1/12th style

Hitec HS-322HD servo

Spares

Spring set
Rear body post
Brand new trued and glued set of wheels and tyres Pink med (rear) Jap med (front) on6 spoke wheels so that they can be used with...
Mardave differential with 48dp spur gear (needs a rebuild)
motor plate
Front wishbone (black plastic)
Steering arms x 4 (silver plastic, with stub axles)
Front body posts (TC3)
Motor pod (only as spare as twisted slightly)
Classic Batt holder (need to drill chassis if you use this)

Tyres again
Pink Med rears,
Jap med fronts
Gold med rears

All nearly dead.

For the Mardave i’m after £55 (buyer to pay fees and postage)



















Associated RC10B4 Factory Team
Boxed with manual



Has served me well over the years, proven to be very reliable and competitive at club level.
It has a yellow rattle can spray job.

Has all the factory team bits on it. Could probably do with a diff rebuild (but is fine really) and a bit of a tidy. But its all in good condition.

Included with it are

Spares
BNIP
FT Blue Locknuts 8-32 x6 -6943
20D caster blocks -9592
2x Front bulkhead -9563
Axle shims -7368

Used
Spring set (silvers are on the car at present) -1581, 1582
25 deg Caster blocks
Front shock tower
2x Motor guard
Left steering block
3 front a arms (2x graphite 1x plastic)
Rear bulkhead/chassis brace -9564
Rear chassis plate -9570
Used diff parts
FT blue hinge pin brace -9665
Transmission case -9574
2 motor plates, 1 blue, 1 black
Spare shell (bashing as tatty)

Tools that came with the car
Associated basic camber gauge

Some turnbuckles and assorted bits and bobs.


Tyres currently on the car Ballistic Buggy greens rear (life left in them), Schumacher minispikes yellow (walls perished, nearly had it) slim tyres on wide wheels.

Tyres included

Fronts
Schumacher mini pins (yellow i think)
Schumacher Mini spikes Yellow and green (pair of each) slim on narrow wheels

Rears
Shumacher mini spike yellow ( life left in them)
Shumacher mini spike green (nearly had it)
GRP conespike (similar to Schumacher green) life left in them

Big bag of springs and roll bars. No idea on brands or whether they even fit. Yours if you want them.


Electrics
Novak GTB speedo with printed instructions good condition -
Savox Servo sc1258 boxed good condition, label fallen off -





£SOLD (buyer to pay paypal fees and postage)



Radio/electrical/randoms




Spektrum DX3.0 with 3 receivers (sr3000 1 of which has had a new aerial added) and a z590 Hi Torque race servo £75 (buyer pays fees and p+p)


Lipo Batteries
1s Demon Power 5000mah 45c £15
2s Intellect 5000mah 30c £20
2s Vampire Racing 5000mah 40c (swollen ever so slightly, still very useable and plenty of poke) £20 (buyer pays fees and p+p)


Lipo Charge bag £Sold (buyer pays fees and p+p)

Much more tire warmer and much more temp controller Boxed, great condition £40 (buyer pays fees and p+p)

CS high grip Full can (honestly used once or twice)
Tire tweek 2000 ½ bottle (this stuff is shit hot and rare nowadays) £Soldadds. (buyer pays fees and p+p)


I'll try to check up on here as often as possible. Ideally don't want to split stuff.



Admin, any problems with my ad, just say and i'll sort it asap.

I can't apologize enough for my shitty green carpet

Cheers,


Dan