Go Back   oOple.com Forums > General > 12th & 10th On Road

Reply
 
Thread Tools Display Modes
  #1  
Old 23-02-2019
mattcaney mattcaney is offline
Member
 
Join Date: May 2013
Posts: 63
Default 1/12th National Hot Rod

Hi

I would like to start racing again, but this time a lot cheaper.

I would like to race in 1/12 National Hot Rods as this seems like a 'controlled' formula.

I not raced or used 1s Lipos, so I am a bit stuck for choice of Speed Controller, Servo, Charger, Lipo to use.

I have an unused Code RC 2.4 Stick combo which I could use.

Is there a problem with the voltage as 1s cell being a lot lower to power the receiver, servo and transponder.

Any help would be great.

Many thanks

Matt.
Reply With Quote
  #2  
Old 05-03-2019
qatmix's Avatar
qatmix qatmix is offline
Mad Member
 
Join Date: Jun 2008
Location: Manchester
Posts: 1,203
Default

HotRods are fun. They are what GT12 was intended to be but never was

You will just need a 1S esc. This will allow your servo and reciever to work properly. Most places limit the servo spec as well, so you will not really suffer from any brown outs. However if you do run a Savox I would use a power cap to help compensate for and unexpected dip in power.

Check you local club rules and see what they recommend.
__________________
http://www.thercracer.com/
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 02:07 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
oOple.com