|
#1
|
||||
|
||||
Losi xx steering arms/spindles
Hi anyone got any losi xx/xxcr steering spindles?
They are for a little project I am working on. Paypal waiting. Thanks, Mark
__________________
:: AE B5MCE - SP 7.5 v3.0 Brushless Motor - Reedy Shorty Lipo - Savox Servo - Spektrum Rx :: :: Paint By Turnip Paint :: |
#2
|
||||
|
||||
try concept racing m8 . he has loads of retro losi parts mostly nip
|
#3
|
||||
|
||||
Cheers dude,
You got a web address/URL? Thanks.
__________________
:: AE B5MCE - SP 7.5 v3.0 Brushless Motor - Reedy Shorty Lipo - Savox Servo - Spektrum Rx :: :: Paint By Turnip Paint :: |
#4
|
||||
|
||||
here's his number 07722 216766
|
#5
|
|||
|
|||
Are you after the spindles or the inboard steering arms, or both ?
Whilst the xxcr and xx parts are interchangeable, they are not identical. The original xx had more ackerman built into the steering arms. - They were more L shaped, with no extra holes. The CR shipped with with an upgraded steering arm set which gave less ackerman, repositioned the drag link further back and gave an optional extra hole to reduce ackerman further. (this setup was also sold as an upgrade for the xx prior to the cr release) On the outboard spindle the CR was shipped with 25 degrees caster blocks whereas the xx shipped with 30 degrees. - The spindles are sold together with the caster block and I'm pretty certain that a 30 degree spindle gives a slightly different height for the ball stud to a 25 degree spindle. Hope this helps. |
#6
|
||||
|
||||
I am after just the spindles really. Its for a micro scale project I am doing.
Thanks for the technical info.
__________________
:: AE B5MCE - SP 7.5 v3.0 Brushless Motor - Reedy Shorty Lipo - Savox Servo - Spektrum Rx :: :: Paint By Turnip Paint :: |
|
|