Schumacher K1 aero setup

[Mullan84]

Hi guys, right just god my K1 aero today, now I need help with setup with pinion and the best places for the innards. Does the servo wire go inbetween the belts or over. Also how do you do you add female and male connectors.
Advice would be awesome

[jpmatrix]

Hi.

Here is a pic of when I had mine to give you a rough idea. You might have to zoom in. Servo wires were fed in between with shrink wrap to keep things tidy. Zip ties are helpful to keep wires from moving around.







Here is a link to the petit ev website which is an excellent guide on set upsincluding more electronic setup guide and track setups etc.

http://site.petitrc.com/setup/schuma...CatK1Aero.html

Not sure what you need regarding female male connectors. Is this for the lipo itself or motor connectors? Typically you need 4mm male bullet connectors to plug into the lipo terminals. Like these....

https://www.ebay.co.uk/itm/252230701788

Or low profile ones if you want to solder the wires at 90deg.

https://www.ebay.co.uk/itm/331543658427

You also probably get a better response if you post in the Schumacher section on this site.plenty of info on set ups , problem solving etc.

[Mullan84]

Originally Posted by jpmatrix

Hi.

Here is a pic of when I had mine to give you a rough idea. You might have to zoom in. Servo wires were fed in between with shrink wrap to keep things tidy. Zip ties are helpful to keep wires from moving around.







Here is a link to the petit ev website which is an excellent guide on set upsincluding more electronic setup guide and track setups etc.

http://site.petitrc.com/setup/schuma...CatK1Aero.html

Not sure what you need regarding female male connectors. Is this for the lipo itself or motor connectors? Typically you need 4mm male bullet connectors to plug into the lipo terminals. Like these....

https://www.ebay.co.uk/itm/252230701788

Or low profile ones if you want to solder the wires at 90deg.

https://www.ebay.co.uk/itm/331543658427

You also probably get a better response if you post in the Schumacher section on this site.plenty of info on set ups , problem solving etc.

Cheers pal. The connections are for inbetween the motor and esc, just incase either goes pop.