|
#1
|
||||
|
||||
Vintage Ultima gear ratio
Hi all, I'm running the uprated 48dp spur with steel gear coupled to the delrin counter gear on my mk1. I'm running a 13.5t brushless set up and wondered what pinion to run?
I also have the kit 32dp spur as I've heard the 48dp gears are chocolate. Is my 48dp spur with the attached metal gear still made of chocolate? Cheers! |
#2
|
||||
|
||||
Custom top deck on Ultima
Made by Fibre-Lyte
|
#3
|
||||
|
||||
Looks nice!
|
#4
|
|||
|
|||
Looks brilliant! Just what i need for our upcoming vintagemeet. It looks great for droppong a shortypack inline with the chassis. Well done!
|
#5
|
||||
|
||||
That's my intention too! I'm looking for a nice, poss carbon shorty tray and strap.
|
#6
|
||||
|
||||
Shorty tray and strap options for Ultima
Hi all. I'm searching for a nice poss carbon tray & strap to go inside the chassis on my car. Any suggestions welcome!
Cheers! |
#7
|
||||
|
||||
More Ultima Progress
Steering almost done
|
#8
|
||||
|
||||
Lovely
How hard it is to fit the RC10 steering? Thinking about trying it on my Ultima MK1.
__________________
Schumacher KF | K1 Aero | RWS RZ6R |MiniZ MR-03 | Orion R10 esc | LRP motors | Orion 90c lipos Rusti Design - Awesome custom stickers and cool stuff My trader feedback Last edited by Gayo; 01-10-2014 at 10:27 AM. |
#9
|
||||
|
||||
Quote:
otherwise the zx5 steering fits also ..... mvh isobarik |
#10
|
||||
|
||||
Really? Great, thanks.
__________________
Schumacher KF | K1 Aero | RWS RZ6R |MiniZ MR-03 | Orion R10 esc | LRP motors | Orion 90c lipos Rusti Design - Awesome custom stickers and cool stuff My trader feedback |
#11
|
||||
|
||||
It's easy, enlarged the chassis holes and counter sunk. Then I've fitted the RB5 turn buckles.
|
#12
|
|||
|
|||
I have an old upgrade steering kit from a company that took Houge steering cranks and sold them as a hop up for an ultima. As mentioned above, bigger holes- that's all it takes
|
#13
|
||||
|
||||
Ultima Pro gearing question
Hi all,
Is the standard 48dp dpur 62 teeth? And regards to pinion size for a 13.5t brushless set up to be used on carpet, what pinion size would you start with? I have a 21t on at the minute but not raced it as yet. Cheers! |
#14
|
|||
|
|||
The standard spur gear on the pro is NOT 48dp but a metric pitch size. Can't remeber exactly which but either 0.5 mod or 0.6. 62 teeth sounds about right. Regarding the pinion: just hear around what others have as final ratio and calculate back what your spur and pinion ratio needs to be to get the same final ratio |
#15
|
||||
|
||||
Thank you. So a 48dp pinion is no good? I'll try and find out what pitch it is!!
|
#16
|
||||
|
||||
The Ultima Pro uses 0.6 module pinions.
__________________
Visit my showroom |
#17
|
||||
|
||||
Thank you. I'm about to buy some pinions, I'm useless at working this stuff out! I run the Mk1 gear diff and the pro spur with steel counter, also I have the alloy inner gear.
Any help on pinion size appreciated! |
#18
|
|||
|
|||
My Ultima Pro has a stock 57 teeth spur gear. The pitch is 0.6 module. I confirmed the pitch by measuring the spur.
|
#19
|
||||
|
||||
Thank you. I'm going for a 22t pinion and go from there.
|
#20
|
||||
|
||||
Ultima sporting new blocks
|
|
|