|
#1
|
||||
|
||||
can you thin rcs liquid mask
can you thin rcs liqiud mask for spraying onto a shell as it is to thick for my gun to spray evenly ?
|
#2
|
||||
|
||||
For applying Liquid mask I would suggest getting a larger gun in that case.
Although yes, it can be thinned with water. The more you thin it down, the more coats you may need to apply. |
#3
|
||||
|
||||
jon, many thanks for the reply , its a spray gun i use for re-colouring leather seats and it has a 1.4mm nozzle, the problem is more likely to be the size of compressor. i`ll try thinning with a drop of water. Cheers
|
#4
|
||||
|
||||
Not a problem bud.
Do you do the leather work as a profession? Send me a link to your site etc if so. Yeh, 1.4 should be ok but try adding a little water and see how you get on. You won't need a lot to notice a difference. Cheerz, Jon |
|
|