Go Back   oOple.com Forums > Car Talk > Hot Bodies / HPI

Reply
 
Thread Tools Display Modes
  #1  
Old 24-10-2016
colin b colin b is offline
Member
 
Join Date: Nov 2009
Posts: 115
Default D413 chassis which one ??

I need an extended chassis for my d413 but have no idea which one to get !!
Carbon or Ali ?? +6mm or 4mm ??at the front Avid,schelle or hpi ???
Any comments on what they do to the handling would also be helpful !!
Reply With Quote
  #2  
Old 24-10-2016
Origineelreclamebord's Avatar
Origineelreclamebord Origineelreclamebord is offline
Mad Member
 
Join Date: Sep 2010
Location: Netherlands
Posts: 1,545
Default

Assuming you have the original plate on your car right now: what are you looking to improve on the car?

I haven't tested any other plates on my D413, but generally aluminium chassis' have less flex than CF. This will make the car feel sharper and can make the car feel more confidence-inspiring, particularly in high bite conditions. The centre of gravity will also become lower (good for high-bite conditions). The car will be more sensitive to setup changes, which can lead to a more dialled in car; it however can also mean the window within which your car performs well becomes smaller (so the car needs more attention to the setup to keep it dialled in). As standard the D413 has a lot of flex (compared to other cars), hence the option of an aluminium chassis exists.

Regarding wheelbase, a longer wheelbase makes the car more stable at high speed and more suitable for flowing, high-speed layouts; it can also make the car more forgiving towards oversteer (in loose/low-grip conditions). It also makes the car less suitable for tight corners and sections. The D413's standard wheelbase is relatively short for current 4WDs, hence there are (only) optional chassis' that extend the wheelbase.

In the end the choice is down to preference and setup; I'm still using the original chassis as I've found a setup that works well for me without changing the chassis. Instead I'm using custom shock towers and shorter shocks (Associated); this keeps the car flatter at high speeds and makes the car feel sharper despite high amounts of droop and a thin stabilizer.
__________________


3D Printing Upgrade Parts - FF210 Buggy

Last edited by Origineelreclamebord; 24-10-2016 at 02:34 PM.
Reply With Quote
  #3  
Old 26-10-2016
colin b colin b is offline
Member
 
Join Date: Nov 2009
Posts: 115
Default Chassis

Thanks for the info mate I'm gonna try a few things as have only ran the car twice once on slippy and once on carpet think I might invest in an avid Ali chassis for carpet tho and if I can't get a good slippy setup I'll try the +6 carbon
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 03:31 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
oOple.com