|
#1
|
|||
|
|||
Associated b64 rear tower
Does any one now why people are putting the rear tower forward on the other side of the rear bulk head thankyou
|
#2
|
||||
|
||||
Hi,
Do you have a photo? Don't see how you could mount the tower in front of the bulkhead. MiCk B. :-)
__________________
http://www.dublinmodelracing.com/ (Off-road racing in Dublin) http://www.p-dubracing.co.uk (Stocking: 8Racing / AVID / GHEA / Xpert Racing / Factory R/C / Alton Design Innovations) http://www.msdmodels.ie/ (Trackside and on-line RC supplies.) |
#3
|
||||
|
||||
Quote:
You will need to use the short shock stand offs + about 1mm of spacers at the top and around 4mm of spacers between lower eyelet and wishbone. This allows mod allows you to move a chunk of weight forward helping rotation, even more so when you move the wing forward so it is almost touching the tower like it is in the standard location. You'll gain a load of natural rotation and the car seems significantly better in direction changes. Together this allows you to set the front of the car up to give the steering feel you want easier, especially if used with the V2 steering rack. |
#4
|
||||
|
||||
Hi,
Thanks for the info. Sounds like it's worth trying. MiCk B. :-)
__________________
http://www.dublinmodelracing.com/ (Off-road racing in Dublin) http://www.p-dubracing.co.uk (Stocking: 8Racing / AVID / GHEA / Xpert Racing / Factory R/C / Alton Design Innovations) http://www.msdmodels.ie/ (Trackside and on-line RC supplies.) |
|
|