mi4cx rollbars

[Craig W]

just fitted rear 1.2mm rollbar it work 1 side not the why that

[jimlee]

Make sure you haven't tightened the small grub screws too tightly.
Take off shocks and hold car upside-down. When you push up the right hand side the left should start to come up a few cms. The same when you do the same with the other side. You may have to tweek the bar slightly to get the same "lift" on each side.....

[Craig W]

Originally Posted by jimlee

Make sure you haven't tightened the small grub screws too tightly.
Take off shocks and hold car upside-down. When you push up the right hand side the left should start to come up a few cms. The same when you do the same with the other side. You may have to tweek the bar slightly to get the same "lift" on each side.....

by bending it