Lazer zxr

[isobarik]

Yeah welsh its for the suzuki hubs to have them mounted. I have like 40 sets of yokomo rims

First i was thinking of having the existing parts modified but then when i saw these i just have to order them ,and if they are to long it can be just cut down. from where the bearing rests to the edge 27 mm

Since the dollar is so low i think i will order them from the states.

mvh Isobarik

[Welshy40]

Does anyone know the part number for the hyper clutch layshaft. I know i posred it on a web site somewhere but cant find it. This is what i am also after.

[isobarik]

You dont have the manual for the LAW12 left ???

mvh Isobarik

[kek23k]

Originally Posted by isobarik

You dont have the manual for the LAW12 left ???

mvh Isobarik

Oh iso you're so cryptic and so much fun

[Welshy40]

Originally Posted by isobarik

You dont have the manual for the LAW12 left ???

mvh Isobarik

Ive got the manual but couldnt see the part number for the layshaft. Im either going blind or looking at a different manual.

[SimonW]

Hi James, I was wondering if you might have a spare ZX or similar chassis and drive train you could sell don't need suspension or shocks and it doesn't have to have any bling bits either, I have a cunning plan, LoL

[isobarik]

Originally Posted by kek23k

Oh iso you're so cryptic and so much fun

If you read the early post you will see that i sold an complete LAW-12 to welshy since he promised me to be the most dedicated bitch of all time ...


btw i dont think you can order just the shaft alone ....i´ll get back
mvh Isobarik

[kek23k]

Trigger-happy mouse finger caused a double-post, doh!

[kek23k]

Does this mean your are going to start running a ZXR(R?) instead of the ZX-S proto or the Tamiya? Looking forward to some pics of the runner if you are

[isobarik]

Oki welsh im back ..the number for the shaft is .....

LAW-12-1 cou can find the number in the zxs-evo manual.

oki now you got it but hey i dont think it made things any easier.....

mvh Isobarik

regarding the trade do you need just the LA-31 or do you need the finned plate also.

[Welshy40]

Iso i reckon just the rear top deck mount would do it. I can do without the finned plate. Thanks for the part number, i must be going blind as i couldnt see it.

[Welshy40]

Originally Posted by kek23k

Does this mean your are going to start running a ZXR(R?) instead of the ZX-S proto or the Tamiya? Looking forward to some pics of the runner if you are

Im racing the ZXR-S (my version that someone in Racer mag called, i wonder who that was HKP) as well as the ZX-S. I will post pics eventually when ive got everything.

Ive sold the Tamiya, and was good but didnt have the buzz that the ZXR gave me when i used it for 12 years.

[Welshy40]

Originally Posted by SimonW

Hi James, I was wondering if you might have a spare ZX or similar chassis and drive train you could sell don't need suspension or shocks and it doesn't have to have any bling bits either, I have a cunning plan, LoL

Sorry mate i havent got anything yet. If you want a Chassi, top deck, shock towers, steering, servo plate, L plate and even motor plate and stronger version than the original look at fibre-lyte website as they do a shed load. I use them for all my designs.

[moth898]

Welshy, I found something that should work if you are using saddle packs.

http://www.integy.com/st_prod.html?p...999&p_catid=28

its about half a inch wide and layed down it should fit just perfect in between saddle packs

[Welshy40]

Nice, i will be using rudebitz brass plates down the middle for extra weight and for lipo placement like on the tamiya 511. Ive designed my lipo tray the same way so if no weight is needed then i may get this. Problem is if it gets hot will that damage the cells?

[isobarik]

Originally Posted by Welshy40

Iso i reckon just the rear top deck mount would do it. I can do without the finned plate. Thanks for the part number, i must be going blind as i couldnt see it.

That explains the hands on the girls....ha ha ha ha

mvh Isobarik

[Welshy40]

Mate nothing wrong with a nice pair of ear warmers, and they were rather tasty. I had seconds after the UFO race as well. Also now to hunt down a LAW12-1 layshaft as I have been told that Kyosho have none.

[isobarik]

I´ll bet that Neil at RW can make one .

do you want to have measurments ????


mvh Isobarik

and if i bet thet neil can make one then he could make an hybrid with fittings for the RB5 slipper ...hm ....hm ....why havent i thought of that before....

[oli4ke]

Hi guys, I'm in the need of a ZX-S manual, can somebody help me getting a copy in PDF?

Cheers

[isobarik]

The evo version downloadable from kyosho japan...

mvh Isobarik