|
#1
|
|||
|
|||
540 possible micro scale
Ive used a mini-t and a half8 in the past but now looking to get into micro scale stuff again. What can take a 540 size brushless motor and can take that kind of power without constantly replacing stuff. Any response would be great.
|
#2
|
||||
|
||||
None will I am afraid....the novak 380 brushless are good racing motors, but are not designed for bashing....try a mamba cm26 or similiar.
__________________
:: AE B5MCE - SP 7.5 v3.0 Brushless Motor - Reedy Shorty Lipo - Savox Servo - Spektrum Rx :: :: Paint By Turnip Paint :: |
#3
|
|||
|
|||
Is there anything that can take a 540 with modification even ?
|
#4
|
|||
|
|||
On a couple of the US sites there are guys that have fitted 540's to the Mini Revo, they don't say how long they lasted tho
|
#5
|
||||
|
||||
E Revo 1/16 with a tenbolt motor mount can handle the powa..slipper is the best friend...i have tested a Miniquake with a 12T single brushed motor and 8 2200mah Half sub c cells...it was a heavy beast...diffs hold up, but the spur where roasted...so the motor to, cuz i was around 25/40 geared
|
|
|