|
#41
|
||||
|
||||
Yep,pinion won't be a problem,biggest I have is a 25t. Ill be running a black TM2 if your stuck for one. Ill be there from 5.30 tonight.
Phill |
#42
|
|||
|
|||
thanks for the offer, unfortunately i wont be able to make it, stuck at work,
if james allows me i am going to go over tomorrow or friday for a quick practice, and try and get used to the buggy. |
#43
|
|||
|
|||
dont know if anyone can correct me on this.
i have just received the below tyres from MB to fit on some rear durango wheels #U6786 - Schumacher Block - Rear Tyres - Yellow - CAT pr now ive got them on the wheels after a fight but how does the bead sit on the wheels, with the block tyres there seems to be a 5mm overhang over the inner and outer wheel edge. my ballistics and other schumacers tyres sit flush with the edge. have i bought the wrong tyre (beed) for durango wheels or are they meant to be like this. i know they say (CAT) on them so do they not fit durango wheels? comparrison all what i have received |
#44
|
||||
|
||||
They're fine,just a different side wall that's all. Mini pins fit similar to your blocks on rear but not quite as much over hang. Check out the ones you have on your car.
|
#45
|
||||
|
||||
The conventional modern day tyre size is 2.2 inch, this is what your ballistics etc are. The schumacher blocks are basically a revamped older tread tyre in a modern compound, when they were brought out the standard tyre size was 2 inch, so these tyres still have a diameter designed for 2 inch rims - its not a problem though just fit them onto your 2.2 rims, as you say it will be a very tight fit! Just use a standard insert - I notice you have bought the 'tubby' insert, this will be ok for your modern tyres but too big I think for the blocks, make sure you glue them and you're good to go
|
#46
|
|||
|
|||
Cheers james. Just need to glue them up now. Thought they was a bit tight butvthat will explain with the sizes.
Am i ok to go abd have a few hours practice on the track tomorrow (friday). Just want to feel how the car handles. Will be there around 4ish. Cheers |
#47
|
||||
|
||||
Thats fine yes, don't rely on getting me on here though, send an email please, mail@robinhoodraceway.com, theres my number on there for emergencies also.
|
#48
|
|||
|
|||
been down to RHR tonight for the first time on the practice day. really enjoyed it,
on arriving i met some old touring car drivers which i havent seen in 4 years so had bit of a catch up. Charlesk i now know who you are , i didnt realise how many replies you have put on my thread and how much help you gave me getting set up on here. i was running those tyres from your advice on here. still need to sort the handling out, but need to re-oil my shocks, and try a few different set ups, need to set my transmitter up properly also. but will get there eventually. i wont be down again for a few weeks now as i am on holiday, but thanks once again. Great track and on my door step |
Thread Tools | |
Display Modes | |
|
|