Schumacher/worksop round 3

[mark christopher]

if you run a car that takes saddle pack please let me know at worksops round 3 meeting so i can try a set of saddle pack lipos in it, we want to make sure they fit as many cars as possible

[Northy]

X11?

[Chrislong]

How about a 4+2 configuration saddle?

[DaveG28]

Happy for you to try 3x3 in my 501x, especially with these stories about the NIMH at the mo!

[telboy]

I've got a lovely D4 you could try them in Mr christopher.

[mark christopher]

Originally Posted by Chrislong

How about a 4+2 configuration saddle?

ill bring a dremel failing that a hammer and chisel

Originally Posted by telboy

I've got a lovely D4 you could try them in Mr christopher.

they fit in that one

[Northy]

Any chance I could have a go with a pack Mark?

G

[mark christopher]

Originally Posted by Northy

Any chance I could have a go with a pack Mark?

G

if my 4800 are here by then, may only have one pack and a dummy set up to make sure thay fit all the cars, might be able to let you have a run!

[Northy]

That would be ace!

[PaulRotheram]

x11 chassis x2 on that order list G.

[Northy]

I have 2 on order Paul
I won't be doing the same thing again though

G

[DaveG28]

Is there an entry list for the meeting yet by the way?

Dave

[jimarea51]

Hi all,

Can we enter online or on the day? I'm away and don't think that i can get hold of a copy of the entry form let alone the postal address...

Thanks

Jim

[Robfo]

From what i was told yesterday the entry is nearly full, have a look on the Schumacher website for the entryform and contact details.

[Northy]

Tel, how can me and Jim get an entry?

G

[Stu]

A PM to Tim Ward was just the job last time - I've done the same again.

Was ace last time - hopefully it'll be just as good next week.

[PaulRotheram]

Anyone know if a shop will be attending this meeting who stocks D4 parts?

[RSharpy]

Its PBM Racing who will be at Worksop, although not sure if they have D4 parts. Give Andy a bell in the morning, the shops number- 01773 769323.

[muzzy]

Anyone who would like to enter round 3 of the series next sunday please feel free to send me a pm with ALL your details in as requested on the entry form and I shall get you booked in and then just pay on the day, had quite alot of pre entries for this event so if your attending and you haven't told us yet please do so asap!!!! Also to the track helpers from last time could you please pm me and let me know if your planning on doing the same next weekend so then we can get everything organised properly once again and have a really good track. From talking to a few people we feel we need to put down 2 lines of tape near the start line so people who are setting off from 1-5 have their cars on the front row, and then 6-10th start on the back row, hopefully this will help to reduce any problems at the start of each heat. Any other suggestions please shout up and we shall see what we can do
No plans to move the rostrum though as yet.
Hopefully it shall be another really good track and good meeting

[RogerM]

One bit of information missing from this thread is the date of the meeting .... I'd like to go but have no idea when it is!