BALANCE CHARGERS

[JJM844]

Looking for some advice on which is the best balancer charger for lipos, I'm currently using an Imax b6. Any advice would be appreciated.

[mark christopher]

i dont think there is a best, there all good at what they do, just the more you spend the better internals you seem to get

cml do some good ones as do schumacher, but id struggle to pick one if i needed one

[rondoolaa]

I'd second that, one balancer is as good as the next, its just the charger that's different, the balancing circuitry in every charger does the same job,

If you want a charger that will be amoung the best at not too bad a price get the team Orion advantage touch charger,

http://www.teamorion.com/index.php?d...iew&page_id=46

I have 2 and other guys at our track have them and others are planning on getting them,

The rest of the guys I know use the imax b6, so you could just stick with that as its a popular charger.

[RudeTony]

Mark is right, you get what you pay for and this is one of the latest and one of the best out there

http://www.the-pred.co.uk/zencart/in...oducts_id=1007

[Neil Skull]

The B6 is an ok charger.
Just make sure you have enough power for 1 c or more!

[mark christopher]

Neil is correct but i use 6000 cells and still cahrge a 5 amps (habit really) as it make no difference to performance just reduces charge tile charging at higher amps, even though my charger will do up to 8 amps x 2 channels

[JJM844]

Thaks for the input guys appreciated.

[passy]

I would recommend getting a charger with an intelligent storage function. On my Hyperion charger I select store mode, the charger decides whether it needs to charge or discharge the cells to reach the ideal storage capacity of between 60-70%.

[cornishboy176]

1+ for the Orion Touch Charger



Just done the update aswell

Woo Woo i can change the colour of the screen!!

oh yeh.........and charges upto 6 amps

[JonyNitro]

I have the icharger 208b, 350 watt charger most chargers are 50 watts, you can get the 106b for £50/60 but you need a psu to run it,

[slow coach]

2A max discharge for the orion touch seems a bit low is that correct ???!!

[mark christopher]

Originally Posted by slow coach

2A max discharge for the orion touch seems a bit low is that correct ???!!

you dont need to discharge lipo!

[DCM]

Gens Ace iMars chargers, good price to!! http://www.giantshark.co.uk/gens-ima...-p-407515.html

[stegger]

What are peoples thoughts on charging at more than 1c say at 10amps with the thunderpower charger or equivalent ?

[Neil Skull]

Originally Posted by mark christopher

Neil is correct but i use 6000 cells and still cahrge a 5 amps (habit really) as it make no difference to performance just reduces charge tile charging at higher amps, even though my charger will do up to 8 amps x 2 channels

Mark,
With today's Lipo's Team Orion recommended to charge at no less than 1C.
Better to charge at 6.5 amps!

[RudolfXC]

Originally Posted by mark christopher

you dont need to discharge lipo!

If you fully charge a pack and your car breaks near the start of the race, you would want to storage discharge them which would take up to 3 hours at 2A.

That's why I have the LRP Pulsar Touch.

[mark christopher]

Originally Posted by RudolfXC

If you fully charge a pack and your car breaks near the start of the race, you would want to storage discharge them which would take up to 3 hours at 2A.

That's why I have the LRP Pulsar Touch.

And? If you have a final to run no probs, if not discharge em while you mend ur car at home, not like there is any rush....

[DCM]

Only thing i can think of, is that if you've not raced in a while, you need to put a cycle or two through the cells to wake them up, if thats the case, a low discharge current will be a pain.

[kaszal]

I have two Turnigy Accucel 6 chargers from "nilesinstall rc" on eBay...

http://www.ebay.co.uk/itm/Turnigy-Ac...ht_1427wt_1111

As a club racer, this is fine for me and I don't see the need to spend more. It fast charges, balances and 'stores' my LiPos and my transmitter pack. I've also used them with LiFe and Nimh.

[Allan1875]

Originally Posted by DCM

Only thing i can think of, is that if you've not raced in a while, you need to put a cycle or two through the cells to wake them up, if thats the case, a low discharge current will be a pain.

I'm new to lipo's but i thought they advantage over NiMH is that they don't have a memory? I thought if you put a storage charge through them, then just peaked them they should be perfect straight off?