|
#1
|
||||
|
||||
batterys help, time for some new ones
HI all
im currently running core rc 5000maHr 30c/60c saddle packs but these are starting to get a slight bulge my fist set so probably around 11 months old ? anyway what i wanted to ask was should i keep the same spec or go for higher discharge 80 / 100c ? would this be better for our club set up and would they be less prone to swelling as they can handle a higher discharge ? i only run a speed passion R 8.5t and controller with standard spur and 24 pinion. any advice would be welcome as im still not that savvy on kit yet. well subject advice anyway |
#2
|
||||
|
||||
Quote:
Turnigy are fine, I ran them for a few years with no issues, these look like the latest one. These links are for the worldwide shop, make sure you select the UK shop. http://www.hobbyking.com/hobbyking/s...APPROVED_.html Or http://www.hobbyking.com/hobbyking/s...Approved_.html http://www.hobbyking.com/hobbyking/s...ddle_Pack.html
__________________
I live with fear everyday....sometimes she lets me race!!!! Schumacher F1..The original KF. TLR 5.0 AC .. FORSALE |
#3
|
||||
|
||||
Legend, thanks
so 90c then ! i have a set of hardcase turnigy 30/60 and they havent flexed. prices are good too for the ones you listed. |
#4
|
||||
|
||||
for staying on the page for two mins i just got a pop up offering the £42 set at £36 ! it just gets better
|
#5
|
||||
|
||||
Need to make sure they are BRCA approved as well
|
#6
|
||||
|
||||
noted Shaun and BRCA approved ordered
|
|
|