|
#1
|
||||
|
||||
SV Servo horn?
Hi i am running a Ace RC DS 1015 Servo on a standard servo horn on my Cougar SV Pro but i keep breaking them. Does anyone know of a upgrade part i could fit to stop this from happening again its starting to cost me alot of money when it is one a race weekend.
__________________
Robin Paynter. Team C Racing Absima Nuclear RC DHR Paint Phat Bodies South West RC Ltd
|
#2
|
|||
|
|||
I put on a gh racing aluminum one on my servo, Same problem i was breaking them as well.
|
#3
|
||||
|
||||
i used the tamiya servo saver but you need to put a 2.5mm spacer under the 4 screws that holds the plate on above the servo
http://cgi.ebay.co.uk/ws/eBayISAPI.d...#ht_1320wt_907 |
#4
|
||||
|
||||
also use the same servo saver in the SX3
not broken 1 yet |
#5
|
||||
|
||||
Answer rc alloy horn. Never had a problem since I fitted it about a year ago.
__________________
Team Schumacher www.racing-cars.com Paint by www.customblitz.co.uk Feedback http://www.oople.com/forums/showthread.php?t=67178 |
#6
|
|||
|
|||
dynamite do one for£3;50 and its fine,i just got one for mine
|
#7
|
||||
|
||||
I've used both the Answer RC and the Losi alloy horns with success on Cougar SVs.
|
#8
|
||||
|
||||
Alloy horn with a savox in my SV
I have tried the answerRC horn with my savox servo but it is a bit too big - pushes into the steering assembly. Anyone got any thoughts what would be a better fit?
|
#9
|
||||
|
||||
Strange, I use the answer rc on a savox 1258 and it fits and works perfectly. Is your servo mounted direct i.e. no spacers?
__________________
Team Schumacher www.racing-cars.com Paint by www.customblitz.co.uk Feedback http://www.oople.com/forums/showthread.php?t=67178 |
#10
|
||||
|
||||
i`ve fitted a tamiya 51000 hi torque servo saver with the 54120 alloy horn to mine as i was getting somewhat annoyed with it destroying servo`s.
i set the servo back into the lower bulkhead uprights to give clearance for the servo saver and had to trim some material from under the top bulkhead,then put a slight bend in the alloy horn. |
#11
|
||||
|
||||
Schumacher say the Cougar is a competition car, and there for does not need a servo saver.
So what they are saying is, if you have a cougar, you are driving in competition and you are a good enough driver never to crash, so you don't need a servo saver ! That's a very odd point of view. I've seen plenty of competition drivers at top level crash. This servo saver question keeps coming up, why the hell don't Schumacher just make one ? It can't be that hard ! |
#12
|
||||
|
||||
+1 for the answer RC alloy horn (mine fits perfectly with savox 1258). As far as a servo saver goes I'm a beginner to racing crash plenty and have yet to break my servo (hoping thats not famous last words ) The steering hubs do seem to go though so that could be whats keeping the servo safe?
|
|
|