|
|
#1
|
||||
|
||||
Saddle pack in a D4
I have the D4 sitting on the shelf almost ready to go, just need tyres and a steering bearing after the original went walkies somewhere..
Im not really wanting to get my cells redone to fit so want to go trakpower lipo but haven't seen a photo of one fitted but also want to know the best way to go abouts securing it in the car, this seems good but B44 only http://www.redrc.net/2008/03/diggity...44-lipo-mount/ |
#2
|
||||
|
||||
It wouldn't surprise me if that fitted the D4 too. They are very similar cars.
?? Anyone got both cars, or had both cars and can compare the holes etc on the chassis? |
#3
|
|||
|
|||
the trak power saddles wont fit the d4 unless the top deck is raised, apparently by 1 mm or so.
im guessing a few washers would do the trick |
#4
|
||||
|
||||
I have seen a photo of a D4 with Trackpower lipos in but was not sure how can someone help please
|
#5
|
||||
|
||||
raise top dect 2mm with spacers and lift the battery posts to suit, i got some carbon straps for mine
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD |
#6
|
||||
|
||||
Is that with the plastic cell trays removed?
I assume it is. Is it poss to 'shave some off of the rear topdeck to make them fit? |
Thread Tools | |
Display Modes | |
|
|