Micro-T Aerial

[aeb4]

If you break the aerial on a micro t, do you have to buy a new ESC or can you solder a new one on.

[rc_penguin]

Originally Posted by aeb4

If you break the aerial on a micro t, do you have to buy a new ESC or can you solder a new one on.

just take the case off the reciever/esc and resolder it, i must of done this 7-8 times along with the motor and battery wires and it still works

[aeb4]

I lost the aerial so what wire do i use

[rc_penguin]

If you've got an nackered old 27 meg receiver lying around you could nick a bit of that as you only need about 10 centimeters worth

[aeb4]

Cheers. I'll have a go tomorrow