|
#1
|
||||
|
||||
Futaba 3pk on 2.4Ghz
When i try to 'connect' the transmitter and rx, it only connects on the #8 part (FRANCE) is this normal?,
Also is the France part made only for France, or the only one allowed in France?
__________________
Associated TC5 Tamiya TT-01E Quite a rare discontinued hard to get hold of NIB Tamiya TB-01 |
#2
|
||||
|
||||
Turn the pot that looks like an arrow to "0" on the module luke and rebind the receiver to the module The france bit is only for france like if you were in the USA you can't use our 40mHz (well you could but you know what i mean)
__________________
Stevie Brew BW-RACING@HOTMAIL.COM http://www.oople.com/forums/showthre...hlight=stegger |
#3
|
||||
|
||||
ok cheers mate, i will give it a go
__________________
Associated TC5 Tamiya TT-01E Quite a rare discontinued hard to get hold of NIB Tamiya TB-01 |
#4
|
||||
|
||||
The France setting narrows the bandwidth of available channels and reduces output power a little. Read your instruction manual for the correct setting
|
#5
|
||||
|
||||
i got it sorted out last night,
turn on tx, then car and press the rx button until it goes solid green
__________________
Associated TC5 Tamiya TT-01E Quite a rare discontinued hard to get hold of NIB Tamiya TB-01 |
#6
|
||||
|
||||
__________________
Stevie Brew BW-RACING@HOTMAIL.COM http://www.oople.com/forums/showthre...hlight=stegger |
|
|