|
#1
|
||||
|
||||
C4.1 wing mount options?
I've noticed my wing sits a tad too high on my C4.1!
Are there others that fit, which would sit the wing at the more traditional height? Cheers in advance Darren
__________________
If you think you can't learn anymore, then give up! but remember only losers give up. Bury Metro Member http://www.bmrcc.co.uk/ Team Associated B6.1 Absima Team Driver Still have my old Team Associated C4.1, Team C Evo and Yokomo Bmax4 just in case my lads take up the sport someday. |
#2
|
||||
|
||||
No mate its a schumacher part its fixed by the rear shock tower
|
#3
|
|||
|
|||
U can cut off the hook part of the wing mount an then use the second hole down to screw it on the shock tower, should bring the wing down about 4mm
|
#4
|
|||
|
|||
The JConcepts alloy ones (in blue or black) will lower your wing 7mm (and be stronger as well as looking good too) http://www.jconcepts.net/store/index...roducts_id=745
Available now from stock from any of our X-Factory UK dealers http://www.xfactoryrc.co.uk/index.php/dealer-locator
__________________
ORCA - LC RACING - RUDDOG PRODUCTS - JCONCEPTS - ALPHA PLUS - TEKIN RACING - ULTRAPOWER AVID R/C - VAMPIRE RACING - EXOTEK RACING - LUNSFORD RACING - X-FACTORY - TUNING HAUS - WTF AME - RAGE R/C - REVOLUTION DESIGN RACING PRODUCTS - McKUNE DESIGN - TEAM AZARASHI X-PARTZ - PHAT BODIES - RACERS EDGE - RM2 - DIRT RACING PRODUCTS - DMS INSERTZ TKR GRAPHICS - BF MATERIALS - BATAN - DMS PARTZ - TEAM AJ Tel : (01923) 816636
|
#5
|
||||
|
||||
I used Losi 22 mid motor wing mounts on my Centro
__________________
Iain Schumacher Laydown Schumacher Cat L1 Schumacher RC Octane |
Thread Tools | |
Display Modes | |
|
|