|
|
#1
|
|||
|
|||
hpi cyber 10b
what size spur gear would i need for a 6000kv ezrun in this buggy
|
#2
|
|||
|
|||
stop your fixation on spur gears. You can run the kit spur in any car, it's the pinion gear you need to alter. Just get yourself a range of 48 dp pinions from 17-23 and then you can alter your ratios easily and go up or down a tooth on the pinion depending on motor, track layout, car etc
__________________
4wd - X4TE 2wd - X2C (Mad Rat passed down to son!) Ansmann Racing UK RIP - MicroTech Racing Trader Feedback |
#3
|
|||
|
|||
thanks jimmy
|
#4
|
|||
|
|||
does it need a slipper clutch to stop the main driveshaft from breaking
|
#5
|
||||
|
||||
For the Ezrun 5.5t you'll want 18, 19 and 20. 20 works for fast flowing tracks, but needs 30C Lipos to get decent punch, 19 is an all rounder and 18 works well indoors or on very tight tracks.
The standard spur is the only size I've seen!
__________________
Yz4 - Yz2 DEX210 - Cobra 4210- DEX410 RC10 Team - Manta Ray - RC10T Mini Trophy - Blizzard - Wheely King Tz4 - GT24B BMRCC Emergency back-up race controller (but only if nobody better is available) |
#6
|
|||
|
|||
i am going to run a4600kv motor with my traxxas esc with 19pinion gear
|
Thread Tools | |
Display Modes | |
|
|