|
||||||||||||||||
|
#1
|
||||
|
||||
|
Hey guys
Ive been having trouble since the start of the carpet season with my driveshafts and steering block on my XRAY T2009. The coupling that goes inside the driveshaft that holds the pins keeps locking up, causing stiff steering as coupling cannot move very well. I have changed nothing on these before the carpet season. The steering block keeps stripping on the hold where the steering arms where front toe is ajusted goes into, i am being careful to leave it slack and stop tightening when it nips the plastic, the only thing i have changed on these is put a 2mm shim onto the arms which screw into the steering block, do i need a slightly longer screw? Sorry for the long post but answers to my problems would really help, it is getting very frustrating and expensive doing this. thank you.
__________________
Schumacher Mi4LP - Speed Passion V2.1 ProStock, Speed Passion V3.0, Futaba 3GR 2.4ghz, Savox SC1251MG Low Profile, GM V-Maxx 5400 50C, TiR Screws, TiR Layshaft, Ti Turnbuckles. Sponsors - Schumacher, Gingapaint, Lite Modz |
|
#2
|
||||
|
||||
|
Problem now solved thanks to member of another forum.
__________________
Schumacher Mi4LP - Speed Passion V2.1 ProStock, Speed Passion V3.0, Futaba 3GR 2.4ghz, Savox SC1251MG Low Profile, GM V-Maxx 5400 50C, TiR Screws, TiR Layshaft, Ti Turnbuckles. Sponsors - Schumacher, Gingapaint, Lite Modz |
|
#3
|
||||
|
||||
|
Don't tell us how you fixed it then.....
|
|
#4
|
||||
|
||||
|
Cause was probably that much embatrasing that he doesn't want to tell
__________________
| Slovak invader in Schumacher Racing UK team on home soil | | Team Lochness official page | | RCSGraphicWorx - paints, paintjobs, decals, custom wear | Mr.O inserts | | Ralls Racing - best rc shop | Nuclear RC | DCD personal timing systems | |
|
#5
|
||||
|
||||
|
All the more reason to find out!
|
|
#6
|
||||
|
||||
|
Apparently the washer is to big on my front toe links though this is Graham Kennys set-up...
as of driveshaft, replace barrel and pin and give a good clean i was told, hope this works. getting frustrating
__________________
Schumacher Mi4LP - Speed Passion V2.1 ProStock, Speed Passion V3.0, Futaba 3GR 2.4ghz, Savox SC1251MG Low Profile, GM V-Maxx 5400 50C, TiR Screws, TiR Layshaft, Ti Turnbuckles. Sponsors - Schumacher, Gingapaint, Lite Modz |
|
#7
|
||||
|
||||
|
Truly this never happened to me on any of Xray cars I had (T1 FK04, T2, 007, 008 and 009), but it should help.
__________________
| Slovak invader in Schumacher Racing UK team on home soil | | Team Lochness official page | | RCSGraphicWorx - paints, paintjobs, decals, custom wear | Mr.O inserts | | Ralls Racing - best rc shop | Nuclear RC | DCD personal timing systems | |
|
#8
|
||||
|
||||
|
I had the 007 and never had this problem and never had this problem on the 009 until now, really strange
__________________
Schumacher Mi4LP - Speed Passion V2.1 ProStock, Speed Passion V3.0, Futaba 3GR 2.4ghz, Savox SC1251MG Low Profile, GM V-Maxx 5400 50C, TiR Screws, TiR Layshaft, Ti Turnbuckles. Sponsors - Schumacher, Gingapaint, Lite Modz |
|
#9
|
||||
|
||||
|
Calvin....you need to start sitting beside the "grown-up" again.....this never happened when I sat in the creche.....lol
|
|
#10
|
||||
|
||||
|
Quote:
![]() Really wanna make a b final next week, will hopefully be quiet as its sunday not saturday. Though the B can be very rough it reminds me of the time i went to banger racing
__________________
Schumacher Mi4LP - Speed Passion V2.1 ProStock, Speed Passion V3.0, Futaba 3GR 2.4ghz, Savox SC1251MG Low Profile, GM V-Maxx 5400 50C, TiR Screws, TiR Layshaft, Ti Turnbuckles. Sponsors - Schumacher, Gingapaint, Lite Modz |
![]() |
| Thread Tools | |
| Display Modes | |
|
|