View Full Version : M-Chassis
J_Farthing
20-04-2008, 06:34 PM
Does anyone know what wheel bases are achiveable with the M-03 chassis
and if a hpi mini civic shell would fit
any help much appriciated
4 been evil
20-04-2008, 07:07 PM
3 Wheelbase lenghts short 210, medium 225 and long 230.
Hpi mini bodies where all 210. Also ABC bodies are 210.
terry.sc
20-04-2008, 07:38 PM
The HPI Civic and Miata bodies are 225mm wheelbase, not 210mm. The HPI Mini could be built at 210 or 225mm, the Nitro Mini was made to the 225mm wheelbase, which is why the Civic is 225mm to fit it.
The M03 such as the Mini Cooper doesn't include the extender piece. You will need an M03M kit, such as the Suzuki Swift to get the 225mm wheelbase.
rcluke
21-04-2008, 03:02 PM
get an M-03R and the limited edition shiny blue frame set :thumbsup::thumbsup:
they rule :thumbsup:
terry.sc
21-04-2008, 06:10 PM
they rule :thumbsup:Until all the chrome flakes off:lol: It's also only 210mm wheelbase.
rcluke
21-04-2008, 07:38 PM
Until all the chrome flakes off:lol: It's also only 210mm wheelbase.
it looks nice until it flakes off though :thumbsup:
J_Farthing
21-04-2008, 08:42 PM
Thanks for your help i have allready got my hands on the M-03M extension piece
rcluke
24-04-2008, 11:37 AM
Until all the chrome flakes off:lol: It's also only 210mm wheelbase.
you get all of the extention parts BTW, so it can be M-03 / M-03M / M-03L
Spoolio
25-04-2008, 04:30 PM
On the subject of M-chassis, I am going to buy a Eunos Roadster but wondered if it was possible to shorten an M-04M chassis so it fits under a Mini bodyshell, or is it the right size already?
I just want a RWD Mini but don't want to hack about my existing M-03 chassis.
4 been evil
26-04-2008, 04:09 AM
On the subject of M-chassis, I am going to buy a Eunos Roadster but wondered if it was possible to shorten an M-04M chassis so it fits under a Mini bodyshell, or is it the right size already?
I just want a RWD Mini but don't want to hack about my existing M-03 chassis.
The smallest you can make a mo4 is m. You could always make it a l and use a bmw mini body. Have done this and made it to look rallycross style with rear wing etc.
hardrider
26-04-2008, 05:41 AM
Had a friend who tried to fit a HPI Roadster shell on his M03M.
Didn't work.
The servo mount section of the M03 was too tall for the sleek shell.
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.