B44 gearing: whay cant I nail it?

[danny the elfman]

hey guys. I can never seem to get the gearing right on my b44, its always over heats. Im running a 6.5t hpi flux sensored motor (great motor by the way) but after about 8 mins of use it burnt me when i touched (thank god it didnt break, it gave me a blister :( ) Right now its get the stock spur, and a 22t pinion. Any suggestions on what pinion? thanks :D

[branstonpickle]

Hi on my b44 with a 6.5 i would run a 19 pinion and that should help with the heat then go up or down a tooth from there.....

[tisher]

8 mins on a 6.5t will get hot in any car a 22 pinion is to high unless your Lee Martin I run a 20t and stock spur on my ballstic 6.5 and its a s quick as any other car

[Hog]

6.5 in my B44 equates to normally an 18 or 19 tooth pinion depending on the track, but an 8 minute run is going to generate a lot of heat whatever you do.