PDA

View Full Version : slipper loose


guinness
30-05-2012, 10:44 AM
dex210
no matter how much i screw the nut of the slipper the clutch still slipping .
ideas?pads are good.

Big G
30-05-2012, 10:57 AM
pads are seated correctly in the spur? they can easily drop out when it's loose.

Chris-S
30-05-2012, 11:05 AM
Check the layshaft isn't worn. If it is, remove the burr from the inside and outside, you might need to use a 5x7x0.2 shim to make up for the material that has worn away.

adey
30-05-2012, 11:20 AM
Had the same problem. The slipper pads wear very quickly. I put b4.1 pads on mine and it was fine. Check the tube that goes on the layshaft is ok too

HarlowS
30-05-2012, 11:29 AM
Someone had the same issue at a club meeting last week, I sorted some new pads out and still the same, suggested checking there was nothing wrong in the gearbox. After he had took apart and rebuilt it was fine and flipping wheelies everywhere. May be worth checking there is nothing up inside the gearbox.

AfroP
30-05-2012, 12:26 PM
check the circlip in the diff
many people have had similar issues and its because the circlip in the diff has popped off when tightening
its possible that by loosening the diff the circlip will pop back into place
the solution seems to be an after market steel circlip

xray do one

theres a link in a thread somewhere on here. will link it if i find it again

this the xray part number

Xray 966080 8mm dia. CH-clip (10)

av4625
30-05-2012, 04:35 PM
Yes check the diff i thought it was slipper too then i got gear diff and it fixed everything

Chequered Flag Racing
21-06-2012, 05:35 AM
Yes check the diff i thought it was slipper too then i got gear diff and it fixed everything

Came across a slipping slipper last night in a pals car that's fitted with a gear diff. No matter what we tried it wouldn't stop slipping.

tomvanelsen
21-06-2012, 06:10 AM
Ive got the same problem, i tightend the diff all the way down(just for testing), put in ae pads and tightend the slipper nut all the way down.
No matter what i do it keeps slipping
I can even make it slip by keeping the wheels pushed down and turning the spur with my hand

Chequered Flag Racing
21-06-2012, 06:24 AM
Wonder if there's some suspect pads in the latest batch to hit the shops. Pal is going to try the pads from his 410 to see if they work.

I have an unused slipper so going to measure pads etc

AmiSMB
21-06-2012, 07:02 AM
I usually find that the problem is with the aluminium spacer on the layshaft. You need to file it down slightly and place a small shim either side of it but make sure there is still a bit of play in the shaft when the gearbox is together. You can also place a shim after the bearing but before the first slipper pad which will allow the slipper to be tightened. I use AE pads as they are thicker than the original Durango ones and once I did this I have never had the problem again.

coleman758
21-06-2012, 07:15 AM
It's the pads!

I have the same problem, dump the Durango pads.
Get your hands on a set of AE B4.1 pads.

Since I changed them on my car I has been perfect.

Alan Reeves
21-06-2012, 08:03 AM
Agree with Matt.
My Durango pads lasted about 3 meetings, my ae ones I bought to replace them have lasted ever since (6 months?)

Reo
21-06-2012, 08:35 AM
yups pads to thin, get ass, yokomo pads.

JezT
21-06-2012, 09:28 AM
+1 for Pads

Changed Max's to AE and the slipper has been fine ever since

However these look like the ultimate from the states:

http://rcshox.com/shoxshop/catalog/product_info.php?products_id=55

guinness
21-06-2012, 12:26 PM
What is the part number for the AE B4.1 pads?

hotrodchris
21-06-2012, 03:26 PM
What is the part number for the AE B4.1 pads?
AS9603

MHeadling
21-06-2012, 03:45 PM
I use Schumacher Slipper pads, these fit the std spur fine and seem to work well. Just another option....

sime46
22-06-2012, 07:46 PM
The alloy tube on the layshaft wears. It's a known problem. There's a new hard anodised one coming. That's the problem.

NeilRalph77
22-06-2012, 07:55 PM
The alloy tube on the layshaft wears. It's a known problem. There's a new hard anodised one coming. That's the problem.


+1

That is indeed the problem another problem is that its only coming not actually here!!!

tomvanelsen
23-06-2012, 06:29 PM
this helps: http://www.petitrc.com/setup/durango/setupdex210/DEX210_SlipperSpacerWear/index.html

adey
23-06-2012, 09:44 PM
I use the hardened layshaft spacer and b4.1 slipper pads. Solved the problem.

tomvanelsen
24-06-2012, 06:14 AM
Where can you get the hardend one?

steve_haskins
24-06-2012, 02:15 PM
had the same problem
the pads once worn arnt thick enough to let you do the slipper up enough!
i cheated and glued 2 pads together [a small amount of superglue] on one side only this made the material thicker and have done 4 meets since with no problem
remember to use the thicker pad on the outside not the inside or the spur will rub on the gear cover

adey
24-06-2012, 02:44 PM
Where can you get the hardend one?

I called Durango in the uk. Told them I had an issue with the car and they sent me one.

tomvanelsen
24-06-2012, 04:34 PM
But it isnt listed as an option part or whatsoever

adey
24-06-2012, 06:30 PM
I don't know why it isn't listed but I called them and I got one.