View Full Version : My SV2 build.
Getpip
01-06-2012, 04:30 PM
Well I finally got around to building the SV2.
I took some pics and wrote a few words.
Thay can be found here if you get the urge to take a look....
http://www.pipskiracing.blogspot.co.uk/2012/06/schumacher-cougar-sv2-build-part-1.html
Martyn (Bomber)
01-06-2012, 06:13 PM
I agree, the kit is top notch and easily the best buggy I've ever built :thumbsup:
trr061984
01-06-2012, 07:11 PM
I agree except that the servo is a pain in the back side to get out quickly; especially when you forget go screw in the servo horn prior to your first race!
mark christopher
01-06-2012, 07:51 PM
I agree except that the servo is a pain in the back side to get out quickly; especially when you forget go screw in the servo horn prior to your first race!
eh? 4 screws and you can get to it!
BeachBuggyPhil
01-06-2012, 10:21 PM
Try putting the servo horn on an SC10 4x4 crooked and then find out it wasn't. That's a servo that is difficult to get to.
Doh!
neil_p
02-06-2012, 04:05 PM
Nice write up pip, look forward to the second part and racing together again.
wes j.
02-06-2012, 07:44 PM
Nice write up pip, look forward to the second part and racing together again.
It's about time you got yourself one mate:).
Getpip
02-06-2012, 07:49 PM
Thanks Neil, look forward to it.
Wes. He's already fast enough with that bloomin rango, when he can keep it in one piece!
:bored:
wes j.
02-06-2012, 07:50 PM
He's already fast enough with that bloomin rango, when he can keep it in one piece!
:bored:
:lol::thumbsup:
Dave 1975
03-06-2012, 07:43 PM
Nice write up pip, ive just recently built mine too
http://i1251.photobucket.com/albums/hh560/Dave_1975/a09a1ec5.jpg
-really enjoyable build also :)
The only thing I've found is that the rear end is way to soft even with 350wgt and 2.5springs.
I'm going to do what wes has advised and that is to fit 4 hole pistons to the rear shocks and hopefully that should sort it :)
wes j.
03-06-2012, 07:53 PM
Looking good Dave. When's it hitting the track :thumbsup:.
Dave 1975
04-06-2012, 04:27 PM
Looking good Dave. When's it hitting the track :thumbsup:.
Cheers wes:) I'm back off holiday now so plan to hit the track as soon as poss!
When/where are you guys next racing?
:)
wes j.
04-06-2012, 09:17 PM
Cheers wes:) I'm back off holiday now so plan to hit the track as soon as poss!
When/where are you guys next racing?
:)
Weather permitting i'll be racing at A1 club grantham tuesday evening if you fancy it :thumbsup:.
Dave 1975
04-06-2012, 09:58 PM
Weather permitting i'll be racing at A1 club grantham tuesday evening if you fancy it :thumbsup:.
Tomorrow even though it's a bank hol wes ??
neil_p
05-06-2012, 07:55 PM
It's about time you got yourself one mate:).
Already thinking of it mate, but the 210 is going ok I just need to sort out my driving:lol:
SV2 and the DB1 are the only real 2 choices I would make, but I cannot justify buying a new built DB1 but would love one. Every SV2 I have seen, just works, thats all you need!
Thanks Neil, look forward to it.
Wes. He's already fast enough with that bloomin rango, when he can keep it in one piece!
:bored:
Cheers mate, think I have been getting in some lucky laps!:woot:
Will have to have a closer look at your SV2
Getpip
06-06-2012, 07:45 PM
All finished ....
Part 2 is up now for those that are interested....
http://pipskiracing.blogspot.co.uk/2012/06/schumacher-cougar-sv2-build-part-2.html
Martyn (Bomber)
06-06-2012, 11:00 PM
Nice write up pip, ive just recently built mine too
http://i1251.photobucket.com/albums/hh560/Dave_1975/a09a1ec5.jpg
-really enjoyable build also :)
The only thing I've found is that the rear end is way to soft even with 350wgt and 2.5springs.
I'm going to do what wes has advised and that is to fit 4 hole pistons to the rear shocks and hopefully that should sort it :)
I used the 4 hole pistons in the rear at my last race meeting and it did make a massive difference but it is still too soft in my opinion so I have ordered a set of 3 hole tapered ones from Nick on the Forum as so many people have recommended 3 hole for this car.
Dave 1975
06-06-2012, 11:21 PM
I used the 4 hole pistons in the rear at my last race meeting and it did make a massive difference but it is still too soft in my opinion so I have ordered a set of 3 hole tapered ones from Nick on the Forum as so many people have recommended 3 hole for this car.
Hmm I may have to invest in some of those then if I'm still not happy..
I've wondered about fitting stiffer springs to the rear also. 350 oil seems about right...
Dave 1975
06-06-2012, 11:43 PM
All finished ....
Part 2 is up now for those that are interested....
http://pipskiracing.blogspot.co.uk/2012/06/schumacher-cougar-sv2-build-part-2.html
Nice write up again pip....
Be interesting to see how that improved kit thrust assembly compares with the pro spec u1954 as Schumacher still refer to the pro thrust as an upgrade in the manual!
Getpip
07-06-2012, 07:03 AM
Nice write up again pip....
Be interesting to see how that improved kit thrust assembly compares with the pro spec u1954 as Schumacher still refer to the pro thrust as an upgrade in the manual!
Thanks Dave.
I think a lot of manufacturers just confuse 'upgrade' with 'different'!
It keeps us all spending.
:o
Dave 1975
07-06-2012, 07:59 AM
Thanks Dave.
I think a lot of manufacturers just confuse 'uprade' with 'different'!
It keeps us all spending.
:o
Lol :) I know what ya mean!!
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.