convert to mid engine loss 22

[Wilfnsam]

Hi, wanting to convert a losi 22 to mid engine, can I just buy the gear casings and transfer the parts over or do I need other parts, thanks.

[knighthawk]

You need !

Gear Cases
Extra Idler Gear
Two Bearings
Idler Shaft
Shock Tower
Rear Camber Block
Rear Bumper
Motor Guard

Plus extra/different screws

Best way is to check the manual
Can't remember the sizes of the screws which are different but the manual will tell you, just look at the 'M' in the insteuctions

[Frecklychimp]

you will need to change Wing mounts and a new full length bodyshell too :thumbsup:

[knighthawk]

you will need to change Wing mounts and a new full length bodyshell too :thumbsup:

Knew I'd forgot something ! :)

[Frecklychimp]

Of top of head most the screws are same length,maybe the two rear long screws that go through rear wishbone brace/gearbox... the long screw through motor guard/gearbox into motorplate is a different length.

If it's a RTR you want to convert then you'll probably need the anti-squat shim kit too as i doubt you'll get that with RTR