View Full Version : Cougar Invernational Build
MHeadling
14-06-2012, 03:40 PM
Just some pics of the build of the Cougar for the Vintage Invernational race, Nathan Ralls will be on the sticks with this car.
Thanks to Dave Holmes for the bits, here is what I'm starting with,
http://i783.photobucket.com/albums/yy114/headling/465f24db.jpg
I have another Cougar 1 that I got from ebay a few months ago so will make 1 good car from the pair.
MHeadling
14-06-2012, 03:41 PM
Here are some pics from today:
http://i783.photobucket.com/albums/yy114/headling/b07626ac.jpg
Ball raced steering from my eBay car (see other thread) which is a bonus!
B4 shocks spaced out and fitted with Schumacher rod ends
http://i783.photobucket.com/albums/yy114/headling/56f1f0be.jpg
MHeadling
14-06-2012, 03:48 PM
Some pics of the other doner car, I got this from eBay a few months ago.
With the pile of Cougar 2 parts I'll make 1 good race car from the pair
http://i783.photobucket.com/albums/yy114/headling/P1010485.jpg
http://i783.photobucket.com/albums/yy114/headling/P1010484.jpg
http://i783.photobucket.com/albums/yy114/headling/P1010486.jpg
j0pp3
14-06-2012, 08:11 PM
Nice job mate!
Building queens out of a few wrecks is exactly what I'm doing too :wub
Keep it up.
Northern Monkey
15-06-2012, 07:33 AM
Hey Mark
You really set yourself some challenges don't you :lol:
You could do with some Cougar 2 front wishbones to get the geometry right on that. Seeing as most of it looks like a C2 Works.
Al
Northy
15-06-2012, 08:16 AM
I spy some TRX1 parts :)
Awesome build, I'm going to see what vintage weapons I can dig out this weekend :thumbsup:
MHeadling
15-06-2012, 09:45 AM
Cheers Al! It'll all be good in the end! :thumbsup:
Yes I wondered what the white parts were Northy.
Did a little bit last night:
Servo in, tried to use the Schumacher mounts but the were too wide so used some 12th scale ones I had in my box.
Hpi purple turnbuckle too, used an old school KO servo
http://i783.photobucket.com/albums/yy114/headling/40d023c2.jpg
Stretch
15-06-2012, 06:12 PM
It looks like you've got enough bits to do a mid-engined variant.
This used to work amazingly well on carpet with the TopCat. No, really...
MHeadling
15-06-2012, 06:28 PM
Yes maybe a mid motor one day!
A little update, got cells in place and just need to figure out a way to stop the cells moving side to side, maybe some servo posts on there side or a bit of carbon, we shall see.......
http://i783.photobucket.com/albums/yy114/headling/71475d81.jpg
http://i783.photobucket.com/albums/yy114/headling/7716eac0.jpg
mark christopher
15-06-2012, 06:31 PM
http://www.ebay.co.uk/itm/FABIIX-FAB2000-Schumacher-Cougar-2000-Conversion-VERY-RARE-VINTAGE-/320918293649?pt=UK_ToysGames_RadioControlled_JN&hash=item4ab8388c91
MHeadling
15-06-2012, 06:44 PM
Yes seen that Mark, nice but I like these old Cougars as it was my first race car
That would make a great race car that Fabix one
discostu
15-06-2012, 07:05 PM
Double sided tape them in
We made a rocket powers cougar back in the early 90s we made an Alu angle with a d size rocket engin jubilee clipped to the plate then the plate bolted in on the original gearbox fixing a small Rx pack up front to power receiver and servo and a rocket egnigter to shoot this thing across our local playing field. It was all good until the back blast blew the rear bulkhead to bits great fun tho
imull
15-06-2012, 07:31 PM
How about putting the saddles in the rear corners of the chassis like a cougar 1? Electrics down the middle :thumbsup:
Stretch
15-06-2012, 07:34 PM
I'd suggest putting them across the chassis as far forward as possible. They weigh less than the original nicads, so putting them anywhere else will play hob with the weigh distribution.
MHeadling
15-06-2012, 07:46 PM
Cheers for the advice guys, I'll have a play with the cell location when its up and running.
I may get a lipo tray from SX3 and bolt this down once happy on the location, have to see what Nathan reckons when he tests it out.
If I stick with this location of cells I will add some weight under the cells and maybe on the front bulkhead too.
Ralls Racing
16-06-2012, 04:54 PM
looking awsome buddy. cant wait to get out and test it woop woop
steve_haskins
16-06-2012, 05:38 PM
hi Mark
this is my cougar 2, i run brushed in it but saddle lipos, in this set up the car is quite balenced
i put about 30 grams of wieght under the nose cone [handy place and you cant see them]
the car does handle better with cougar 2 wishbones [ the shock mount is different too]
and there were 3 different lenths of rear wishbone available
i find the std mid ones best
hope the pic helps with your rebuild
38968
38969
BORMAC
17-06-2012, 11:31 AM
Any reason why you aren't running the Works rear suspension, the swept CGR2 front arms and the CGR2 front tower?
The Mk1 arms make it a longer wheel base too. Just thought to ask if this was a tuning option or do you lack these items in your inventory?
Cheers-Jason
MHeadling
17-06-2012, 08:49 PM
Hi Jason, these are the parts the car came with, I have a NIP Cougar 2 front tower but I offered this up to the B4 shocks and the tower looked a little too tall for them.
As for the wishbones, again these are what came with the car/parts lot.
I like the look of the Cougar 2 arms, do Schumacher still make them?
What's the difference between the works rear arms? Any idea on the part number??
Any tuning tips would be great.....
BORMAC
18-06-2012, 11:06 AM
Mate the Cougar2 works was released around 93-94 sometime and was the final refinement of the series and in my opinion got it right with all the special parts that went into it.
The rear arms were one off items for both this car and the Bosscat works. Smaller and lighter hubs were used along with smaller and lighter flanged bearings. No doubt this played a part in reducing unsprung weight.
The front 'swept back' arms also changed cornering characteristics.
All the Cougar2 plastic parts were made from P.E.P. from memory. Maybe some one here could shed some more light on these items.
I have a new in pack set of front arms and good condition used rear arms, hubs and bearings if you want to PM me.
Cheers-Jason
MHeadling
18-06-2012, 11:36 AM
Thanks for the info Jason, looks like I have a Std Cougar 2 then.
I'll drop you a PM ref suspension arms
MHeadling
19-06-2012, 04:49 PM
Gearbox rebuild next up, all went pretty well really, flipped the diff plates and added the Schumacher spring washers to the diff bolt to keep tension on it.
Added M3 hex bolts and new self tappers and bearings though out.
http://i783.photobucket.com/albums/yy114/headling/cbbac828.jpg
http://i783.photobucket.com/albums/yy114/headling/907a124e.jpg
http://i783.photobucket.com/albums/yy114/headling/a5323063.jpg
All done and ready to go on the chassis!
http://i783.photobucket.com/albums/yy114/headling/0a49f151.jpg
Ralls Racing
21-06-2012, 07:57 PM
knowing how well you build a car mate im really looking forward to racing this :thumbsup:
bring it to faversham next week if you are down as have a big bag of bits for you know ;)
MHeadling
21-06-2012, 08:11 PM
Thanks Nath :wub
I'v ordered a lipo cradle for it that I need to fit, then rear tower and shocks and its done.
Even got a brand new shell for it from Penguin rc shells, we need to think of a retro Ralls Racing scheme! :thumbsup:
Ralls Racing
21-06-2012, 09:57 PM
Thanks Nath :wub
I'v ordered a lipo cradle for it that I need to fit, then rear tower and shocks and its done.
Even got a brand new shell for it from Penguin rc shells, we need to think of a retro Ralls Racing scheme! :thumbsup:
have a pic of that somewhere that may be of use to mr blitz and rather test his skills ;) was done by a mr darwel back in the day and had a cool character on the front
MHeadling
22-06-2012, 01:09 PM
Sounds cool about the paint job Nath!
Done a little more over the past few days:
I have settled on this saddle cell location, I used the Schumacher Supastox battery cradle (£5) and Predator battery posts and a home made carbon strap.
Gearbox and tower on all ok and the wing mounts on with new rubber bands!
http://i783.photobucket.com/albums/yy114/headling/844bbf43.jpg
http://i783.photobucket.com/albums/yy114/headling/18aa9472.jpg
So next up are shocks on the rear, wheels fitted, shell to be cut out and off to have a retro paint scheme.
Then the car will be off to Ralls Racing HQ for the rest of the electric install and a shake down test, can't wait to see it go!
DerbyDan
22-06-2012, 03:06 PM
Your solution for the battery installation looks very neat!:thumbsup:
I look forward to seeing this completed with Nathan's retro paint scheme:cool:
Stretch
22-06-2012, 05:33 PM
Try putting the shock towers through the dish washer if you want to spruce them up.
I mid motored one of these years ago. Real easy to do and went well. I remember fitting an agr 8x1 motor in it and trying to set off the speed camera on the main road By my house with it.
MHeadling
24-06-2012, 07:30 PM
Shocks on the rear now, plastic drive shafts in too as these are stronger than the roller shafts I had fitted.
I had to use Schmucher long ball joints on the rear shocks to get the right droop
Added some more purple washers, got to love the bling! Lol
http://i783.photobucket.com/albums/yy114/headling/b7061560.jpg
http://i783.photobucket.com/albums/yy114/headling/35b20452.jpg
http://i783.photobucket.com/albums/yy114/headling/5933869e.jpg
MHeadling
24-06-2012, 07:42 PM
It's finished!
Cut out the Penguin RC Cougar 2 shell and added a HB Rear Wing, bit big for the retro look but will be good for some downforce!
It's ready to go off to Ralls Racing HQ for the Esc, Motor and RX install and some race rubber to be added!
One last job is to adapt a gear cover on to it, std Cougar won't fit, tried a B4 one and that's too narrow, any ideas?? Losi XXX?
Final pics for now:
http://i783.photobucket.com/albums/yy114/headling/e2253476.jpg
http://i783.photobucket.com/albums/yy114/headling/809429f9.jpg
http://i783.photobucket.com/albums/yy114/headling/60353d00.jpg
Northern Monkey
04-07-2012, 08:32 AM
Hey Mark
Has Nathan done the body yet? Would love to see it. Also did you manage to get the C2 front wishbones you needed?
Al
MHeadling
04-07-2012, 09:09 AM
Hi Al, well I gave the car to a very exited Nath last Wednesday, he is going to put his gear in it and then send the shell off to paint to his sponsor Custom Blitz for a retro Ralls scheme :thumbsup:
No C2 works R/H arm as yet but got a PM from Moozo on rc10talk so hope he has come to the rescue!
As soon as Nathan has some pics I will post them up.
Northern Monkey
04-07-2012, 09:15 AM
Cool, wish I was going to oople race just to see it. :thumbsup:
So its just the rear works arms you need, not the Cougar 2 front swept back wishbones?
Al
MHeadling
04-07-2012, 09:19 AM
I'll have to bring it to Torch for a race then! :thumbsup:
I have C2 works rear hubs from ebay to go on, I have a front pair of works arms thanks to Moozo!
But yes some works rear arms would be good if anyone has any??
Northern Monkey
04-07-2012, 09:37 AM
That would be good :) come down for the LMR GP in September I'll speak to the guys and see about a vintage heat :D
I'll have a look but don't think I have any rear arms spare. Did you manage to get the flanged bearings for the works rear hubs? They are like rocking horse poo!!!
MHeadling
04-07-2012, 07:49 PM
Yes why not, a vintage heat will be good fun!
Didnt know about the flange bearings, I have given them to Nath so hope he has some in his spares box and get them fitted.
MHeadling
15-07-2012, 05:40 PM
Bit of an update before the main event ( oople invernational ) in 2weeks time.
My car's been at Ralls Racing hq for the radio gear, esc and motor to be fitted.
It's rocking the Proline dirt tyres too! Looks awesome, big thanks to Nath! :thumbsup:
http://i783.photobucket.com/albums/yy114/headling/55ac1486.jpg
http://i783.photobucket.com/albums/yy114/headling/913a0851.jpg
http://i783.photobucket.com/albums/yy114/headling/afbbbd9a.jpg
http://i783.photobucket.com/albums/yy114/headling/7edc2ebe.jpg
Andyp
15-07-2012, 06:21 PM
Looks good Mark , a nice retro/ modern look! Ha , wheres the body? Still in the paint shop?
Hope those tyres are just for show as i thought the vintage race was on the astro?
Ralls Racing
15-07-2012, 06:42 PM
bodyshel is curently with graham at www.customblitz.co.uk for some of his amazing work. will check the thread as thought the vintage was on the dirt as well hence the tyres lol:thumbsup::thumbsup: after chatting to james its defo on the astro.... doh best i get some tyres changed lol
MHeadling
15-07-2012, 07:30 PM
Shame the vintage actions not on the dirt, oh well glue some mini spikes on and let it hit the track!
Cougar 2 works front arms and hubs to go on too, thanks to Moozo :thumbsup:
Can't wait to see the paint job from Mr Blitz :D
tisher
15-07-2012, 08:58 PM
your cougar looks like it might go where as mine might not make it round the first bend:lol:
http://i908.photobucket.com/albums/ac283/vw1998/001-11.jpg
not holding my breath with my 10.5t in it
blitzboy
26-07-2012, 09:43 PM
hope you like this mark all done and ready to fit and hopefully fly well at oople invernational dirt
40543
:thumbsup:, doing the the funky worm dance all weekend .. and the truffle shuffle
MHeadling
27-07-2012, 10:17 AM
Looks sweet Blitz! :thumbsup:
DerbyDan
27-07-2012, 11:08 AM
Cool shell!:thumbsup: Can't wait to hear how this thing goes around the track!
P.S; I knew the Works Cougar2 had different rear wishbones (same as the 'Works' Bosscat) but didn't realise the fronts were different too - compared to a regular Cougar2?
MOGGIE XL
27-07-2012, 11:42 AM
The car does look good. I think those front wishbones are from a mk1 cougar.
MHeadling
27-07-2012, 12:38 PM
Yes your right the pics show the Cougar 1 arms and hubs, but.... Moozo sorted me out with Cougar 2 works arms and I got a set og biss cat rear hubs and works rear arms that are on it now.
Lets hope it goes well today!:woot:
MHeadling
28-07-2012, 06:32 AM
Pic of the winning car! Well done to Nathan on the win, well pleased for him and my old car! :thumbsup:
Cheers to Moozo for the help and pic:
http://i783.photobucket.com/albums/yy114/headling/0dcd7a04.jpg
Moozo
28-07-2012, 07:56 AM
Cool shell!:thumbsup: Can't wait to hear how this thing goes around the track!
P.S; I knew the Works Cougar2 had different rear wishbones (same as the 'Works' Bosscat) but didn't realise the fronts were different too - compared to a regular Cougar2?
There the same as the cougar 2....there different to the cougar 1 mate
Cougar 1's on the car and the cougar 2's are swept arms...
Your very welcome Mark, sorry there's only one pic......it's hard to hold the camera still while fighting a 4yr old from going on the track:woot:
But i enjoyed myself last night well worth the 120 mile round trip.....might have to see if a can go next year:thumbsup::thumbsup:
Mick
Ralls Racing
01-08-2012, 07:20 AM
ended up with the cougar 1 front arms as droops went mental with the cougar 2 front wishbones. did however get the works rear hubs on it
was a great weekend and race. have left the car as it came off the track so mark can get some good quality pics as my camera wont do it justice.
massive thanks again to Mark for the build and loan or a very precious car and graham at www.customblitz.co.uk for the amazing artwork, you are the first person i have seen who can equal and beat the great mr darwell of old and only from my description as well. was amazed m8. now we just need to adjust the rear belt before we go back to defend the title that mr greenwood so graciously gave up so we could make a race of it ;)
Nathan Ralls
Northy
01-08-2012, 08:14 AM
It's all about the fastest lap, always has been, always will be ;)
MHeadling
02-08-2012, 06:34 PM
Picked the car up from Nathan last night at local club meeting. He loved driving the Cougar, he put on the works rear hubs and tried the works front arms but it had too much front droop so stayed with the Cougar 1 arms.
One thing for next time is to try the works front arms and Cougar 2 tower, this should give the right amount of droop.
Some pics as the car was taken from the track:
http://i783.photobucket.com/albums/yy114/headling/a78a355f.jpg
http://i783.photobucket.com/albums/yy114/headling/f63445f0.jpg
http://i783.photobucket.com/albums/yy114/headling/a0248a35.jpg
http://i783.photobucket.com/albums/yy114/headling/0cca0b8f.jpg
http://i783.photobucket.com/albums/yy114/headling/dc0868bf.jpg
The team name, a combo of our names, Niggs and Headling! Niggling lol
Thanks to Nath for his skills on the sticks, Blitz for the paint and Moozo for some of the works parts.
So it's going to be cleaned and popped on the shelf till next years race where Nathan will defend his title!
MHeadling
05-08-2012, 08:37 PM
Well was stripping out Nathan's brushless gear out of it and giving a clean up ready for the shelf and couldn't resist putting on the Cougar 2 front tower and the works front arms, all spaced out for the AE shocks, so she is ready for action when duty calls! Lol
http://i783.photobucket.com/albums/yy114/headling/e4562526.jpg
http://i783.photobucket.com/albums/yy114/headling/e9795bc9.jpg
MHeadling
01-06-2013, 09:24 PM
Hi Guys, long time no updates !
Just had a message from Nathan to get the Race winner dusted off and ready for this years oople vintage race.
As you can see from the pics above its sporting its new front end which I hope will be an improvement over the cougar 1 front end? Any feed back appreciated.....
At last years race Nathan said he had a bit of belt slip, how can we sort this out?? Tighter belt obviously or maybe make a tensioner?
Or could I use a geared gearbox?? Was the works 2 a geared gearbox?? Could I adapt a club 10 mk1 gearbox with my slipper??
MHeadling
11-06-2013, 08:16 PM
An update on the 2013 spec Cougar 2 Racer
New Vega rear wing fitted,new decals the most important ones Oople and Naths sponsor Hpi
Cat SX shocks re built with new tamiya o rings and gold shock shafts, Cat SX quick tune shock mounts.
Needed some purple spacers to clear the towers and rear turnbuckles
Lipo tray drilled and C/S to chassis.
Pics:
http://i783.photobucket.com/albums/yy114/headling/2955E263-53B4-4890-8A54-33A2F1F31C2F-5488-000007AE87C6308B.jpg
http://i783.photobucket.com/albums/yy114/headling/4667110B-250F-4B91-A805-475CE7C69FF5-5488-000007AE9CC296AC.jpg
http://i783.photobucket.com/albums/yy114/headling/5976E3AB-FC08-4813-B6C7-34E68E0D1CC0-5488-000007AE8F3164EA.jpg
http://i783.photobucket.com/albums/yy114/headling/884A32FF-448F-4933-B683-FD722E8B6610-5488-000007AE95FA061F.jpg
Next jobs are to fit Schumacher pro black ball cups and maybe swap out turnbuckles to ti ones and fit the motor and esc, then it'll be off to Ralls Racing for a shake down run ready to beat the pesky RC10's! ;)
MHeadling
08-08-2015, 07:39 PM
Well dusted the old girl off and giving it a makeover
http://i783.photobucket.com/albums/yy114/headling/B10815DC-1934-4E01-8E2F-42CA8DD19FDD_1.jpg (http://s783.photobucket.com/user/headling/media/B10815DC-1934-4E01-8E2F-42CA8DD19FDD_1.jpg.html)
Retro RC
09-08-2015, 09:17 AM
Very cool :thumbsup: hopefully there will be some carbon towers going on to make it look right, fathead has got files to cut the works towers if you need them
MHeadling
09-08-2015, 03:58 PM
http://i783.photobucket.com/albums/yy114/headling/0E61D78B-0E9A-45ED-AA47-587E6504EAE6.jpg (http://s783.photobucket.com/user/headling/media/0E61D78B-0E9A-45ED-AA47-587E6504EAE6.jpg.html)
http://i783.photobucket.com/albums/yy114/headling/57A286C6-5F88-4BF4-910B-05BB4108EF1A.jpg (http://s783.photobucket.com/user/headling/media/57A286C6-5F88-4BF4-910B-05BB4108EF1A.jpg.html)
MHeadling
09-08-2015, 04:01 PM
Cheers Retro, yes agree it needs carbon towers, I'll speak with Fathead or Fiber lyte
Peakey
09-08-2015, 04:24 PM
That's it now I'm gonna have to build a C2W. I shouldn't of sold that chassis I had 😭
Retro RC
09-08-2015, 06:35 PM
Lol do you need 1....... I've got a few 😜
Peakey
09-08-2015, 09:31 PM
Lol do you need 1....... I've got a few 😜
Maybe, let me know what you've got 😁
Retro RC
10-08-2015, 05:44 AM
Cheers Retro, yes agree it needs carbon towers, I'll speak with Fathead or Fiber lyte
Just a heads up the firbelyte rear tower is based on the cougar 2 team not the works, the works has only 5 shock positions and the team has 6
Retro RC
10-08-2015, 05:50 AM
Maybe, let me know what you've got 😁
Sorry mate I've got 1 team car in mint condition a new built works, a works that will be rebuilt as a runner and my full new build custom project car. But the only 1 I'll be moving on is the team buggy which is for fathead when he's ready.
as soon as I get my goodies off fathead that he's working on for me I'll start all 3 cougar builds. And maybe my procat and bosscat builds to they'll just be a tidy up on the procat which is nearly brand new with period futaba electrics and a twister 13 triple motor, and the bosscat is a nib build
NeilRalph77
10-08-2015, 07:36 PM
So what's the hottest motor you'd run in a belt and slipper gearbox without doing major mod's or damage?
MHeadling
10-08-2015, 08:02 PM
When Nathan Ralls raced my car he used a 7.5 but did suffer from belt slip, I would recommend a 10.5
I'm going brushed on this car and will go for a 14-19t motor
NeilRalph77
10-08-2015, 09:08 PM
I have a 13.5 in at the minute but have a 10.5 at the ready, hmmm decisions decisions ?
Peakey
10-08-2015, 10:15 PM
I ran a 8.5 in my XLS the other week and no belt slip just a main belt breakage but that was down to me being lazy and not taking enough of the chassis 😕
Retro RC
10-08-2015, 10:31 PM
I used to run brushed 11 single or 11 quads in my cougar but that was only with 2000 mah ni cads back in the day so probably 8.5 or 10.5 should be fine just remember these buggies are a hell of a lot lighter than modern buggies are so you may need to add weight if using lipo and brushless
MHeadling
16-08-2015, 07:26 PM
Nearly there now :
http://i783.photobucket.com/albums/yy114/headling/0D817B84-20DB-4FDE-8152-D20A5709F310.jpg (http://s783.photobucket.com/user/headling/media/0D817B84-20DB-4FDE-8152-D20A5709F310.jpg.html)
http://i783.photobucket.com/albums/yy114/headling/8483F730-4221-49B7-874F-946BD245439A.jpg (http://s783.photobucket.com/user/headling/media/8483F730-4221-49B7-874F-946BD245439A.jpg.html)
xfactor
16-08-2015, 07:44 PM
Lovin the Purple and White Marko...........:thumbsup:
Almost as nice as ORANGE.......:D:D
DerbyDan
20-08-2015, 01:59 PM
So what's the hottest motor you'd run in a belt and slipper gearbox without doing major mod's or damage?
I was running a 6.5BL is this the last weekend - Cougar Mk1 with ProDiff & Slipper clutch ;)
The car was running approx. 10sec slower over a 5mins qualifying run than I was achieving with my modern buggy. The slipper was adjusted to give a little slip - so probably saved the belt from jumping.
http://img.photobucket.com/albums/v228/DerbyDan/Schumacher%20Cougar/IMG_14661_zpst4xdirad.jpg
NeilRalph77
20-08-2015, 02:57 PM
Is that about 60g you've got stacked there? Is that to aid cornering or just keep the front end down? I ran mine at Bury with the 10.5 there was definitely enough slip to stop it pulling wheelies but at the same time the fronts were always 1/2" in the air through acceleration.
DerbyDan
21-08-2015, 11:21 AM
Is that about 60g you've got stacked there? Is that to aid cornering or just keep the front end down? I ran mine at Bury with the 10.5 there was definitely enough slip to stop it pulling wheelies but at the same time the fronts were always 1/2" in the air through acceleration.
Its a bit of both to be honest.... that's the thing with brushless motors - all that torque can pull the front wheels up even when you decide to open the throttle wide open when you are already halfway down the straight & already at speed! We never used to use weight to aid handling bitd - with the marginal battery duration, we did everything we could to get the cars as light as possible... the thought of adding weight didn't cross our minds!! But certainly on high grip astro the weight on the front helps keep the front end keyed into the desired racing line through a corner & helps reduce that sudden break away into understeer as the power is applied coming out of the corner - where a rear motor car always looses out (over its mid-motor counterparts) when the grip is high!
MHeadling
24-08-2015, 12:54 PM
Well she is finished, I've completed the following changes
Powder coat chassis
SS hardware
New batt holder ( thanks Northy )
New lexan gear cover ( thanks xfactor )
Purple alloy nuts/shims
Hpi aerial mount
Centro wing mounts, JC wing
Vinyl wheel discs
Hara 14 x 2 Orion V2 motor
Cheers to D4ve for the good price on the esc
http://i783.photobucket.com/albums/yy114/headling/60EF9D3F-B486-4138-9060-7465100877AC.jpg (http://s783.photobucket.com/user/headling/media/60EF9D3F-B486-4138-9060-7465100877AC.jpg.html)
http://i783.photobucket.com/albums/yy114/headling/B080ECD7-8D2D-4843-9EEF-71BFB087CE0A.jpg (http://s783.photobucket.com/user/headling/media/B080ECD7-8D2D-4843-9EEF-71BFB087CE0A.jpg.html)
http://i783.photobucket.com/albums/yy114/headling/EB7B748B-4C6F-407D-AD63-56126729CAA0.jpg (http://s783.photobucket.com/user/headling/media/EB7B748B-4C6F-407D-AD63-56126729CAA0.jpg.html)
http://i783.photobucket.com/albums/yy114/headling/0D609DF4-26B4-443F-8FCA-64B27BED2801_2.jpg (http://s783.photobucket.com/user/headling/media/0D609DF4-26B4-443F-8FCA-64B27BED2801_2.jpg.html)
http://i783.photobucket.com/albums/yy114/headling/9D711960-DED0-4B65-BFF7-684BCEDA8B66.jpg (http://s783.photobucket.com/user/headling/media/9D711960-DED0-4B65-BFF7-684BCEDA8B66.jpg.html)
http://i783.photobucket.com/albums/yy114/headling/D97B44BF-8CB8-4CB7-8B4F-4F72C1FB9A88.jpg (http://s783.photobucket.com/user/headling/media/D97B44BF-8CB8-4CB7-8B4F-4F72C1FB9A88.jpg.html)
xfactor
24-08-2015, 02:40 PM
Awesome Marko,
Love the Works Cars. Just something about them.......
Love the matching HARA also....:thumbsup:
MHeadling
07-09-2016, 07:50 AM
Yet another update on the cougar!!
http://i783.photobucket.com/albums/yy114/headling/9E1C6E06-7CB9-418D-936C-B49B09D1BB89.jpg (http://s783.photobucket.com/user/headling/media/9E1C6E06-7CB9-418D-936C-B49B09D1BB89.jpg.html)
http://i783.photobucket.com/albums/yy114/headling/F812ECF9-788A-47E5-A7B8-1E202551D3B3.jpg (http://s783.photobucket.com/user/headling/media/F812ECF9-788A-47E5-A7B8-1E202551D3B3.jpg.html)
http://i783.photobucket.com/albums/yy114/headling/CB4EE80B-2D84-4E49-AC53-631E6CCCE019.jpg (http://s783.photobucket.com/user/headling/media/CB4EE80B-2D84-4E49-AC53-631E6CCCE019.jpg.html)
http://i783.photobucket.com/albums/yy114/headling/0FB3420C-AFB1-4545-AA93-E618133992FA.jpg (http://s783.photobucket.com/user/headling/media/0FB3420C-AFB1-4545-AA93-E618133992FA.jpg.html)
http://i783.photobucket.com/albums/yy114/headling/FEAA0CCA-3F7D-4005-B829-6C5535270385.jpg (http://s783.photobucket.com/user/headling/media/FEAA0CCA-3F7D-4005-B829-6C5535270385.jpg.html)
http://i783.photobucket.com/albums/yy114/headling/6B0E0B52-B2A0-4821-B5D8-0649683206FB.jpg (http://s783.photobucket.com/user/headling/media/6B0E0B52-B2A0-4821-B5D8-0649683206FB.jpg.html)
http://i783.photobucket.com/albums/yy114/headling/B93712EC-6041-40D1-85CA-117974059E77_1.jpg (http://s783.photobucket.com/user/headling/media/B93712EC-6041-40D1-85CA-117974059E77_1.jpg.html)
primesera
07-09-2016, 08:27 AM
That looks awesome. Never seen the idea of body pins like that before. Nice
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.