View Full Version : what do you prefere BL or brushed?
John Lara
05-05-2008, 01:05 PM
Like it says BL or brushed?
And what motors & wind do you use?
In my 501 I use a 4,5T BL or a 9X2 V2 motor
bigred5765
05-05-2008, 02:06 PM
brushless all the way
any one that tells you any difference is just mad
nosram speedos 6.5 2wd 5.5 4wd
John Lara
05-05-2008, 05:01 PM
On a smal track I feel that i have more power with brushed than with BL, I alsoe feel that with BL th power band is diffrent and more top speed:o
bigred5765
05-05-2008, 07:23 PM
i would say you have the wrong motor in
losixxx
05-05-2008, 07:40 PM
carl you forgot the main part of your first post IMO......!
personally i prefer the feel of a brushed motor have tried both and im sticking with brushed for the time being....especialy after seeing all the problems with brushless and wet racing!!!
I agree with losixxx, i personally prefer the feel of a brushed motor setup, i feel like the brushless motors feel almost flat
I have been tempted to go back to brushed motors again, but i am a bit lazy and like the maintenance free side of things
ashleyb4
05-05-2008, 08:12 PM
I Like brushless in 4wd but in 2wd i think i preffered brushed in 2wd but i preffer the low mainternance so ill get used to it.
A
bigred5765
05-05-2008, 08:14 PM
imo your right
Southwell
06-05-2008, 07:04 AM
I prefere brushes but ive stuck to brushless and am getting better with it, if i changed back it would only be in 2wd as that motor will be several meetings before skimming.
When i look back, my results have been worse since going brushless, i didnt think it would make much difference to me, maybe it does :confused:
Southwell
06-05-2008, 07:37 AM
I find it's the instant power that i don't like, all my punch settings are turned down on brushless whereas on brushed it feels less aggressive.
Wraggy
06-05-2008, 07:45 AM
I find it's the instant power that i don't like, all my punch settings are turned down on brushless whereas on brushed it feels less aggressive.
im having the same problem Ian, Punch setting on lowest possible using a Novak 6.5L and its still as punchy as hell :(..
might have to go to a 7.5 L see if it changes it ..
Southwell
06-05-2008, 07:46 AM
im having the same problem Ian, Punch setting on lowest possible using a Novak 6.5L and its still as punchy as hell :(..
might have to go to a 7.5 L see if it changes it ..
Ive turned my curve down by about 30% on my tranny too :lol:
I might try a brushed in my 2wd for Oz:)
Proper retro:woot:
bigred5765
06-05-2008, 09:54 AM
i would just say your all to old and slow to drive brushless :)
super__dan
06-05-2008, 10:15 AM
Ian and Paul, I've recently kind of found the same and so have started running a 7.5 in 2wd, though on a big track like I expect this weekend to be a 6.5L will be going back in. I prefer to run the 'softer' motor and gear up as I find the motors much more tolerant on high gearing than I originally realised of the recomended overall rations suggest.
I also now run -15% throttle (and steering as it happens) curve, which I too have upped to 30% on occasion.
Southwell
06-05-2008, 10:29 AM
I have done the same on my steering curve too, i guess it's a characteristic of brushless? I never went below -10 on my throttle with brushed, and that was only at tivvy!
Well, it's been a bit like "letting the cat outta the bag" / old skool turbo with B/L systems, but it's improving all the time. I found the new Speed Passion GT ESC to be VERY smooth!
B/L in the wet is very critical indeed!
I tried going back to brushed, but I didn't like it now that I'm used to coasting with almost no resistance... which I really like!
B44&501xRacerEX
08-05-2008, 02:19 AM
Brushless for me.
Tekin redline 362(9t equilvalent)with an R1 pro.:thumbsup:
Northy
08-05-2008, 07:47 AM
Brushless for me.
Tekin redline 362(9t equilvalent)with an R1 pro.:thumbsup:
Why? :confused:
G
5POINTSTAR
15-05-2008, 11:13 PM
For me it depends on the class I race, On or Offroad. Touring stock I prefer the Trinity CO27 PRO Brushed in the EVO 4, you can tweak the motor (more power) but maintenance is nonstop. My 501X has the SPHERE Brushless system :woot: and I love it, the power is INSANE!
I love the BL systems but i run 5 cells and 4.5 or 4.0 in my 501X
With 5 cells you get a powerband that is just amasing.
past weekend i had over 2000 left in my packs i 4wd.
And the balance in the car is beter with 5 cells
B44&501xRacerEX
16-05-2008, 03:32 PM
Why? :confused:
G
Because I successfully got my B44 beat with the Tekin RedlineTamiya 501x WE.
My B44 is still no slowpoke though.:lol:
After driving the 501x last week, Id say I accomplished my mission to
have my 501x faster than my B44.
The 501x is alot easier to drive, and it has alot better amount of steering
to my B44. I like to drive both cars though.
It's so hard to choose a favorite overall.
I got the 501x for one job(succeed in trophy races)
I got the B44 for club racing because parts are so much easier to get.
After seeing the 501x in action www.reoraceway.com (http://www.reoraceway.com) or Reo Raceway will be stocking
in 501x worlds edition kits and parts also. :)
Northy
16-05-2008, 03:52 PM
BMag,
You are the man. I am going to take you advice and follow it to the letter.
Thanks.
How did you glue that diff again? And build that other one without some parts in it?
Cheers,
G
B44&501xRacerEX
16-05-2008, 04:06 PM
BMag,
You are the man. I am going to take you advice and follow it to the letter.
Thanks.
How did you glue that diff again? And build that other one without some parts in it?
Cheers,
G
:bored: my bad
Im installing a front one way, and in the rear pulley I'm gonna run tugsten diff balls. That should solve any diff issues I had in the past.
Northy
16-05-2008, 04:09 PM
What balls did you run before?
I run titanium balls in mine.
G
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.