what lipo for sanwa exzes

[bigred5765]

as title, what lipo are you guys using in your sanwa super exzes,
any recommendations links etc

[tyreman]

as title, what lipo are you guys using in your sanwa super exzes,
any recommendations links etc


If it's the exzes x you want a 7.4v lipo 2cell
http://www.ebay.co.uk/itm/Venom-VEN15000-LiPo-2S-1P-7-4V-2400mAh-Flat-Rx-Pack-/320930568625?pt=Radio_Control_Parts_Accessories&hash=item4ab8f3d9b1

[pugs]

Carl, I am sure that lrp/nosram do a 7.2v/7.4v whatever it is:lol: lipo that fits no problem:)

[Darren Boyle]

New one just out from Reedy too, we had them come in for the first time yesterday..

[cjm_2008]

I'm sure i've got an 11.something volt 2800mah pack in my transmitter. it's lasting forever. :thumbsup:

[bigred5765]

our sanwa beep at anything over 10.5 volts if i remember right

[MHeadling]

Sorry to jump in on the thread, what voltage lipo is best for the Super exces?

7.4 or 11.1??

Do giantcod do any that fit??

[bigred5765]

11.1 wont work voltage is to high

[TonyM]

New one just out from Reedy too, we had them come in for the first time yesterday..

I looked on your site but the search facility draws a blank on Reedy. Can you provide a link please.

[MattW]

Exzes X needs 7.4V lipo. Nosram do have one that fits, as do intelect. I'm sure there are others.

[kartdemon]

And 7.4volt 2S LiPo actually does not last that long either, as that is what I use in my Sanwa.

If I could be bothered to find a 3S Life that would fit I would try it. It would have a nominal voltage of 9.9volts and charged voltage of 10.8 I think. If it beeps then you could just try and discharge it slightly.

[Darren Boyle]

I looked on your site but the search facility draws a blank on Reedy. Can you provide a link please.

Hi Tony, Sorry I should have explained better, they arrived at our shop at about 4:45pm yesterday, not yet on the website, will be on Monday morning in both the Reedy and New Items sections...

[TonyM]

Hi Tony, Sorry I should have explained better, they arrived at our shop at about 4:45pm yesterday, not yet on the website, will be on Monday morning in both the Reedy and New Items sections...

Thanks Darren - I'll have a look then.

[wrighty]

Lrp do one if in doubt speak to jamie or joe at Smd they distribute sanwa and they will know

james

[cjm_2008]

I just took the batt cover off my super exzes tranny to see (yes, the pack does last that long!) and it is indeed a 3s 11.1v 2800mah.

I think I've used it for a total of just over 2 hours so far since charging and the voltage has barely moved. I bought 2 packs just in case... seems like a waste of money now!

I got them from demon.

[Aran]

I just took the batt cover off my super exzes tranny to see (yes, the pack does last that long!) and it is indeed a 3s 11.1v 2800mah.

I think I've used it for a total of just over 2 hours so far since charging and the voltage has barely moved. I bought 2 packs just in case... seems like a waste of money now!

I got them from demon.

can I have a link for that battery please

[frogger]

Mine is a LRP Vtec lipo 2800mah 11.1v no. 79985 in my Sanwa Exzes Plus. Superb battery. :thumbsup:


http://www.lrp.cc/en/products/vtec-batteries/lipo/produkt/lipo-tx-pack-sanwa-rds8000-ko-2800-tx-only-111v/details/

[reelman_fishing]

Mine is a LRP Vtec lipo 2800mah 11.1v no. 79985 in my Sanwa Exzes Plus. Superb battery. :thumbsup:


http://www.lrp.cc/en/products/vtec-batteries/lipo/produkt/lipo-tx-pack-sanwa-rds8000-ko-2800-tx-only-111v/details/

The Sanwa Exzes X is only a six cell pack (nims) or 7.4 lipo:thumbsup: 11.1v:thumbdown: is to high a voltage

[Darren Boyle]

Thanks Darren - I'll have a look then.

Hi Tony, it is now online, but sadly it is a "flat" LIPO and only for the Sanwa M11X and NOT the Exzes X, the description when we ordered it was just "Sanwa", never mind it was worth a try.....

[TonyM]

Hi Tony, it is now online, but sadly it is a "flat" LIPO and only for the Sanwa M11X and NOT the Exzes X, the description when we ordered it was just "Sanwa", never mind it was worth a try.....
Thanks Darren for the update.