Most up to date spring comparison chart

[James]

Seems to be quite a few new springs on the scene in various bores, which is the most up to date, comprehensive spring chart around at the minute?

[Hpi_guy]

Try this
http://i1093.photobucket.com/albums/i424/willnearn/0C98855E-C2BA-4A0E-A765-33BDAAEFA7D2-10845-00000988CCED3D87.jpg

[RudeTony]

James, Big Bores spring charts out there are not that accurate....little springs seem fine......I haven't forgotten that part :)

[James]

Thanks Tony - shiny shiny ;)

Thanks for the chart, but there are still a heck of a lot more springs out there than that, for example Durango, X-gear, schumacher, Tamiya etc

[bigred5765]

hope this one helps

[Arn0]

Big Bore Spring Chart is now updated with Associated springs.

In addition, to compare BB shock, a chart with piston's dimension is now available. Bore and rod are to be confirmed. Piston's diameter are unknown to me so if you can provide accurate value feel free.

Refer to this page (link) (http://www.petitrc.com/reglages/UniversalSpringChart.htm)

[Lowie]

no xray included? Could someone?

[luniemiester]

Just multiply the X-ray rating by 5.71 and it will give it you in lb's

Spring rates, for comparison.

Front
Linear 1dot C=0.65 or 3.71lbs/inch
Linear 2 dot C=0.72 or 4.11lbs/inch
Progressive 2 stripes C=0.65-0.85 or 3.71-4.85lbs/inch

Rear
Linear 1dot C=0,35 or 1.99lbs/inch
Linear 2dot C=0,40 or 2.28lbs/inch
Linear 3dot C=0,45 or 2.57lbs/inch
Progressive 2 stripes C=0,35-0,45 or 1.99-2.57lbs/inch