PDA

View Full Version : New 201 rear hubs


MHeadling
22-08-2012, 02:12 PM
Any ideas on the part number and if these are on sale yet??

http://i783.photobucket.com/albums/yy114/headling/83EB8CC1-6C79-4F8C-8304-6D5D759C643E-3476-00000680D888607D.jpg

Chris
23-08-2012, 08:32 AM
#51504

MHeadling
23-08-2012, 02:55 PM
Thanks Chris

MHeadling
02-09-2012, 11:44 AM
My ones came through the post on Saturday, got them from Stella Models in Hk, fit is as per alloy hubs.

http://i783.photobucket.com/albums/yy114/headling/51E9A697-1CF1-4007-AAAE-224808216BAD-11126-0000122476042526.jpg

Pic of the hub :

http://i783.photobucket.com/albums/yy114/headling/695D5EE9-6D60-408D-9505-DD8F41A0FE2C-11126-000012247F90578A.jpg

It maybe hard to see but it straightens out the rear camber link
on the Vega, L/H side if looking from the front has the plastic hub fitted, the R/H side has the alloy tamiya hub fitted.

http://i783.photobucket.com/albums/yy114/headling/E8C91B06-32E0-423D-9E45-3CEB4B7CEE2A-11126-0000122485BF5C21.jpg

hardmankam
07-09-2012, 08:42 AM
What size ball bearings does the new hub take?
The outside bearing looks larger than the inside bearing. Thanks!

MHeadling
07-09-2012, 09:29 AM
Not sure on the exact size but yes has a larger outer bearing, it all fits straight on with std bearings and crush tube.

Have a look at 511 manual as this should show bearing sizes

Fredrik Emilsson
07-09-2012, 09:40 AM
Would guess same as on 201 alu hubs, 1350 outer bearings.

hardmankam
07-09-2012, 10:42 AM
So the larger bearing that came with the 201 alu. hub fits directly onto this hub? If so, it is a 1350. The standard plastic 201 hub uses 1050 size. thanks again!

MHeadling
07-09-2012, 11:05 AM
Yes if you have the Ali hubs its a direct for bearings and crush tube

Didn't feel much of a difference tbh compared to the Ali hubs but loads of link positions to try out

crewie
07-09-2012, 11:32 AM
What toe in do they give?

MHeadling
07-09-2012, 11:45 AM
0 deg as far as I'm aware

frobes2
07-09-2012, 04:43 PM
Far too many holes for you to choose from Mark lol.

ps, you haven't replied to my pm ref. 511 part!!!

Scott..