richardj
11-09-2012, 12:56 PM
Stoke-on-Trent is a fusion from multiple citys in England and therefore the name Stoke fits perfect to our buggy. The magic formula is "togetherness is strength" because the Stoke brings all the pros of a Ready to Run buggy and a high quality competition buggy together. In the Stoke you can find all the plastic parts from the T8.
4WD all-wheel drive
Complete ball bearings
Aluminium big bore shock absorbers
3 differentials
Steel main gear
3mm aluminium chassis plate with side guards
5mm aluminium shock towers
http://www.absima.com/uploads/pics/tr8kit_stoke_n_vr_2_02.jpg
Large volume 17mm big bore shocks provide maximum durability under all conditions. With multiple adjustments on the shock towers you can adjust your Stoke N optimal for each track.
http://www.absima.com/uploads/pics/tr8rtr_stoke_n_det_01.jpg
http://www.absima.com/uploads/pics/tr8rtr_stoke_n_chassis_sl_01.jpg
Through the relative far forward sedentary tank, radio plate and engine position is the weight distribution in front of the buggy. Thereby you can control the Stoke N better by jumps.
At the front axle were built CVD shafts. The rear drive shafts are protected by mud guards against dirt an stone chips.
http://www.absima.com/uploads/pics/tr8ekit_stoke_e_det_10.jpg
http://www.absima.com/uploads/pics/tr8rtr_stoke_n_det_02.jpg
For perfect driving performance you need suspension arms which resists all. That is why the Stoke N has all the plastic parts from the competition buggy T8.
CVD drive shatfs at the front axle
Fully adjustable suspension with right-left hand thread
Mud guards at the rear axle
Fibre-reinforced high-quality plastic parts out of the T8
Adjustable wheelbase
Aluminium steering rack
Swaybars at the front and rear axle
Controllable double disc breaking system with fiberglass
Fuel tank with 125 ml capacity
Pre-printed body
Length: 510mm
Width: 300mm
Heigth: 190mm
Itemnumber: TR8KIT
http://www.absima.com/uploads/pics/tr8rtr_stoke_n_l_01.jpg
Stoke N 4WD Nitro RTR
Equipment:
3.5 ccm Race engine "F349" with 1.4 KW / 1.9 HP and 33.000 RPM
Race exhaust system
2.4 GHz 2 channel radio control CR2S
3 channel receiver
9 Kg steering servo with metal gear
4 Kg throttle-/ brake servo
Itemnumberr: TR8RTR
Available through your local hobby store. Visit www.s-m-d.co.uk (http://www.s-m-d.co.uk)
4WD all-wheel drive
Complete ball bearings
Aluminium big bore shock absorbers
3 differentials
Steel main gear
3mm aluminium chassis plate with side guards
5mm aluminium shock towers
http://www.absima.com/uploads/pics/tr8kit_stoke_n_vr_2_02.jpg
Large volume 17mm big bore shocks provide maximum durability under all conditions. With multiple adjustments on the shock towers you can adjust your Stoke N optimal for each track.
http://www.absima.com/uploads/pics/tr8rtr_stoke_n_det_01.jpg
http://www.absima.com/uploads/pics/tr8rtr_stoke_n_chassis_sl_01.jpg
Through the relative far forward sedentary tank, radio plate and engine position is the weight distribution in front of the buggy. Thereby you can control the Stoke N better by jumps.
At the front axle were built CVD shafts. The rear drive shafts are protected by mud guards against dirt an stone chips.
http://www.absima.com/uploads/pics/tr8ekit_stoke_e_det_10.jpg
http://www.absima.com/uploads/pics/tr8rtr_stoke_n_det_02.jpg
For perfect driving performance you need suspension arms which resists all. That is why the Stoke N has all the plastic parts from the competition buggy T8.
CVD drive shatfs at the front axle
Fully adjustable suspension with right-left hand thread
Mud guards at the rear axle
Fibre-reinforced high-quality plastic parts out of the T8
Adjustable wheelbase
Aluminium steering rack
Swaybars at the front and rear axle
Controllable double disc breaking system with fiberglass
Fuel tank with 125 ml capacity
Pre-printed body
Length: 510mm
Width: 300mm
Heigth: 190mm
Itemnumber: TR8KIT
http://www.absima.com/uploads/pics/tr8rtr_stoke_n_l_01.jpg
Stoke N 4WD Nitro RTR
Equipment:
3.5 ccm Race engine "F349" with 1.4 KW / 1.9 HP and 33.000 RPM
Race exhaust system
2.4 GHz 2 channel radio control CR2S
3 channel receiver
9 Kg steering servo with metal gear
4 Kg throttle-/ brake servo
Itemnumberr: TR8RTR
Available through your local hobby store. Visit www.s-m-d.co.uk (http://www.s-m-d.co.uk)