PDA

View Full Version : Looking to buy a Yokomo YZ10


DanB4
16-09-2012, 10:50 PM
Guys I've been offered all this....always fancied one but as it's not Kyosho I've no idea what a reasonable price to pay is...I've told the guy I dont want the pit wizard or comm lathe.

Cheers all advice welcome

http://i7.photobucket.com/albums/y260/SDRCC/IMG_2752.jpg

DanB4
16-09-2012, 11:05 PM
Car looks to be in great condition and there's a Novak Cyclone and Hammer Pro there too....used to own both!

BORMAC
17-09-2012, 01:07 AM
I'd love to own that lot myself! ;)

DanB4
17-09-2012, 02:10 AM
I'd love to own that lot myself! ;)

Any valuation guesses Jason?

Dan

BORMAC
17-09-2012, 02:15 AM
25 GBP :woot:


Mate I simply have zero idea on what these cars are actualy worth. Wouldn't know a rare one from a common version. Still I'd love to have one of these myself!

...and thse pink wheelz.......:thumbsup: I NEED EM!!!!!;)

DanB4
17-09-2012, 02:24 AM
On another note are you still after new platinum shocks? Got some on a ZX I bought and want some new golds instead?

BORMAC
17-09-2012, 02:33 AM
I have a few sets of these Platinum dampers but nothing brand spanking new. What do you want for them?
I have some good used GOLD's.

DanB4
17-09-2012, 03:45 AM
I have a few sets of these Platinum dampers but nothing brand spanking new. What do you want for them?
I have some good used GOLD's.

drop me an email to [email protected] mate.

lllyf
17-09-2012, 04:06 AM
woo,I love the parts!! have any price for the parts?

Moozo
17-09-2012, 07:29 AM
seen a new wing not in the packet go for about £50ish....:o

lllyf
17-09-2012, 07:40 AM
Yes,price high. but this wing already have holes for works93, I think also fit yz10

CATS
17-09-2012, 08:13 AM
Id say from previous experience in buying/selling these between £250-£300 is a good price to get a set like this for

isobarik
17-09-2012, 08:20 AM
if he include the coke i will take it asap ...

ebay so we all can bid

mvh Isobarik

BORMAC
17-09-2012, 09:04 AM
I'm in desperate need of a pair of pink 2.0" rear rims. If you get this lot and you have a pair spare, I am putting my hand up :)

CATS
17-09-2012, 09:29 AM
Jason, dont JC RACING on ebay sell 2" yokomo pink rims already?

BORMAC
17-09-2012, 09:37 AM
Jason, dont JC RACING on ebay sell 2" yokomo pink rims already?

I'm after a pair of genuine YOKOMO 2.0" rims for my 870c

DanB4
17-09-2012, 09:38 AM
I'm after a pair of genuine YOKOMO 2.0" rims for my 870c

I'll see what I can do :)

DanB4
17-09-2012, 10:06 AM
http://i7.photobucket.com/albums/y260/SDRCC/yz10.jpg

Rich D
17-09-2012, 10:50 AM
Good luck. This German seller has been sending me sporadic emails about this since August 2nd. Twenty in total. Even emailed me on Sunday again. It was on eBay he pulled it off with no bids so that's when I first contacted him. Told me he'd sold it elsewhere then told me the buyer couldn't make his mind up. We agreed a price then he let me down again. Had enough of the bloke now after seeing this ! Total time waster.

DanB4
17-09-2012, 11:10 AM
Good luck. This German seller has been sending me sporadic emails about this since August 2nd. Twenty in total. Even emailed me on Sunday again. It was on eBay he pulled it off with no bids do that's when I first contacted him. Told me he'd sold it elsewhere then told me the buyer couldn't make his mind up. We agreed a price then he let me down again. Had enough of the bloke now after seeing this ! Total time waster.

Hmm, cheers Rich - sounds very similar to what he's been telling me!!

Oh well, I'll save the cash and keep looking for my LWB Mid

ralphee
17-09-2012, 12:25 PM
Hmm, whats this guys name? Dont suppose he is on Tamiyaclub too? Just rings a bell on some nutball i had contact me a while ago to my wanted ads.
Kept me hanging for weeks waiting for him to send pics, and missed a few in that time too, complete fruitloop. Anyhoo, looks a nice haul.

lee

ralphee
17-09-2012, 12:27 PM
In any case, id say theres maybe £400 there? Give or take, ill take the Hammer or Cyclone should anybody buy it and want to offload.

lee

Naushad
17-09-2012, 12:33 PM
I'd agree with you Lee, I'd say 400-500.

This was on ebay sometime ago with some RC10 bits and NiMH from what I recall.

The car looks pretty intact, but I'd want to see close ups before I would make a purchase.

Naushad

superdez
17-09-2012, 04:40 PM
Always hard to value vintage Yokomo cars.

The wing alone is worth up to £50 on a good day. Wheels and tyres I would say around £50, the 2.2 have dropped in value since JC started producing rims, there is not such a great demand for 2.0 wheels IMHO, 2.2 wheels with the deep offset as used for the 870c are the rarest and hence most expensive to purchase.

The Yokomo looking at it is a standard YZ 10 94 with rear Pavidis arms not that special, but getting rarer these days, the box is a bonus. Again hard to value it but anywhere in the range of £2-300.

The important thing with that Yoke is that the hard to find parts look to be all there, bulkheads, battery posts etc.

If you can get it for around £300 all in I'd go for it, I wouldn't pay more than £400.

Hope this helps.

Rich D
17-09-2012, 04:51 PM
His name is Oli. He`s been playing us off against each other so it seems Dan. He had some other used yz10`s in not as nice condition and a few other nip spares. I told him id buy the lot if the price was right. He wanted £940 plus shipping. I told him that was too much and told him i wanted the car pictured one set of tyres and one set of wheels. He told me what he wanted, i said fine send me payment details. Didnt hear for weeks, then he emailed me offering me them again on Sunday with the same pics Dan has got. I told him i still want it, hes not replied again. Sent him a snotty email this afternoon so we will see what he has to say. Im not desperate to own his car, they come up every now and then on eBay. In fact, a new built never ran Pavidis with box only fetched £350 recently so his stuff is not worth telephone numbers to me !

For reference, he wanted £240 for the wheels and tyres when asked. I told him far too much as i need to recoup some of my money not needing them all.

This was on eBay with a day to run at a £200 starting bid with zero bids when he pulled it. What i have offered him was more money than his eBay listing for less parts than he listed !

Naushad
17-09-2012, 05:30 PM
Seems he is a bit unrealistic !

DanB4
17-09-2012, 05:36 PM
His name is Oli. He`s been playing us off against each other so it seems Dan. He had some other used yz10`s in not as nice condition and a few other nip spares. I told him id buy the lot if the price was right. He wanted £940 plus shipping. I told him that was too much and told him i wanted the car pictured one set of tyres and one set of wheels. He told me what he wanted, i said fine send me payment details. Didnt hear for weeks, then he emailed me offering me them again on Sunday with the same pics Dan has got. I told him i still want it, hes not replied again. Sent him a snotty email this afternoon so we will see what he has to say. Im not desperate to own his car, they come up every now and then on eBay. In fact, a new built never ran Pavidis with box only fetched £350 recently so his stuff is not worth telephone numbers to me !

For reference, he wanted £240 for the wheels and tyres when asked. I told him far too much as i need to recoup some of my money not needing them all.

This was on eBay with a day to run at a £200 starting bid with zero bids when he pulled it. What i have offered him was more money than his eBay listing for less parts than he listed !

Oh well, there's always one eh Rich! I agree his communication is terrible!

Not to worry. Cheers

DanB4
20-09-2012, 04:48 AM
So is a works 93 like this worth much? He offered this also:

http://i7.photobucket.com/albums/y260/SDRCC/IMG_2739_zps55e381b4.jpg

Naushad
20-09-2012, 01:11 PM
Hmm, can't be absolutely sure, but doesn't look like a complete/stock works '93.

Seems like he's running brushless with lipos, but at least the TCS system (slipper clutch) in in there otherwise the drivetrain would probably melt!

I don't see the torque rod brace for one thing. The steering system looks more like that you would find on a works '91 or yz10 '94. More pics would be useful if you seriously intend to buy.

Still, a works '93 is worth plenty...

Personally, if I had a car like that....I'd race it to death:woot:

Anyhow, judging by the comments above I think I wouldn't be very keen to barter....

superdez
20-09-2012, 05:18 PM
It's a works 93 but is missing the torque stay that fits over the steering bellcranks and the turn-buckles that fit between the c carriers and the stay. Torque stays come up from time to time (fibrelyte do them) but you rarely see the ball that fit on to the stay, the turn-buckles are very rare if you need to replace them, the part number ZC 209c. The bumper is a RPM one, original yokomo bumpers are almost impossible to find.

It's also missing the battery posts, again very difficult to find.

Here is mine

http://i888.photobucket.com/albums/ac87/superdez75/temporary-14.jpg

DanB4
07-10-2012, 06:39 AM
Well guys I received the box today containing all the goodies....he bloody included the 3 old peak chargers I asked him not to so shipping cost was crazy to Oman, never mind.

I'll post some pics later when i get home and have a good look at what's in the big box, both the cars are there.

I might sell on the Works '93 and keep the other - looks like there's loads of spares for it and probably the missing bits too.

Cheers,

Dan

ralphee
07-10-2012, 08:28 AM
Good score Dan, cant wait to see what you got, youll never tire of a YZ10, still find it hard to not tinker with mine.

lee

DanB4
07-10-2012, 11:23 AM
ZC-720C Rear shock tower for Works '93
ZC-407A Lower Sus-arm set for Works '91 SOLD
ZC-646 Maintenance kit for center shaft
ZC-503 35T F&R pulley sets for diff
ZC-673C Teflon clutch disc for T.C.S.
ZC-415A Steering blocks & Rear hub carriers
ZC-651 Kevlar front drive belt
ZC-401 Steel balls for upper sus-arm
ZC-435 Screw set for wheel hub
ZC-408A Lower sus-arm pins for Works '91 SOLD
ZC-206 Ball ends for tie rods
ZC-671C Inner/outer hub set for 4-T.C.S.
ZC-417R 5 x 11 rubber sealed ball bearings
ZC-423 UJ driveshafts
ZC-630 Main gear & sprocket set
ZC-414 King Pins
ZC-405C Torque rod stay for works '93

upforit365
07-10-2012, 04:33 PM
Dan,

If you decide to sell any of those spares I'd be very interested in the zc-407 and zc-408 arms.

DanB4
07-10-2012, 06:36 PM
It looks fast even sitting still :wub

http://i7.photobucket.com/albums/y260/SDRCC/20121007_223221.jpg
http://i7.photobucket.com/albums/y260/SDRCC/20121007_223239.jpg

upforit365
07-10-2012, 06:39 PM
Wow, that's really nice.....:p

Naushad
07-10-2012, 06:46 PM
Looking great Dan! Did you rebuild?

DanB4
07-10-2012, 06:49 PM
and the Works '93 I got with the car above......going up for sale soon once I put some of the missing bits back on it.

http://i7.photobucket.com/albums/y260/SDRCC/20121007_223339.jpg
http://i7.photobucket.com/albums/y260/SDRCC/20121007_223350.jpg

DanB4
07-10-2012, 06:52 PM
Looking great Dan! Did you rebuild?

Thanks!

No mate didn't do anything really apart from open some NIP pink wheels and some tyres + screws, fit the wing mount kit + wing, put some more decals on and that's it!

The car looks brand new, transmission is silky smooth - easiest 'rebuild' I've ever (not) done! :) :p

Much easier than the Optima Mid's put it that way! :o But I still love 'em.

2 Procats arriving soon so will take a group photo once they're looking nice. Tamiya, Kyosho, Yokomo and Schumacher.

Dan :cool:

Naushad
07-10-2012, 07:36 PM
I found the optimas easier than the yz10!

Anyway if you ever decide to rebuild watch out for the ball diff screw...likes to snap if tightened too much!

Bw

ralphee
08-10-2012, 01:33 PM
Dan

Pretty sure those are 870c wheels bud, pretty rare IIRC, you may wanna try trade them up for some Yokomo dish web to make it a tad more original?
Maybe try get some wheels dots too like i did, they are soooo retro!"
Nice wing though, very 90's lol.

lee

DanB4
08-10-2012, 02:33 PM
Dan

Pretty sure those are 870c wheels bud, pretty rare IIRC, you may wanna try trade them up for some Yokomo dish web to make it a tad more original?
Maybe try get some wheels dots too like i did, they are soooo retro!"
Nice wing though, very 90's lol.

lee

Got some with the cars Lee but they're not too sticky

http://i7.photobucket.com/albums/y260/SDRCC/20121008_182920.jpg

franki
08-10-2012, 02:51 PM
Got some with the cars Lee but they're not too sticky

http://i7.photobucket.com/albums/y260/SDRCC/20121008_182920.jpg

you got most things with that car mate

DanB4
08-10-2012, 03:02 PM
you got most things with that car mate

:) emailed you a pic just now of the wheels, tyres, body and wing

DanB4
12-10-2012, 04:57 AM
Anyone need any wheels?

http://i7.photobucket.com/albums/y260/SDRCC/20121012_081126.jpg

upforit365
12-10-2012, 06:39 AM
What are the art numbers on the pink and white yokomo manufactured wheels (right in your picture)?

DanB4
12-10-2012, 11:03 AM
What are the art numbers on the pink and white yokomo manufactured wheels (right in your picture)?

White = ZC-800 (narrow)
Pink = ZC-800 and ZC-801 (narrow and normal)

DanB4
05-11-2012, 07:59 PM
Dan

Pretty sure those are 870c wheels bud, pretty rare IIRC, you may wanna try trade them up for some Yokomo dish web to make it a tad more original?
Maybe try get some wheels dots too like i did, they are soooo retro!"
Nice wing though, very 90's lol.

lee

Following Lee's advice.

New full set of pink 870C wheels....only been mounted on shelf queen for a few weeks

http://i7.photobucket.com/albums/y260/SDRCC/20121105_203404.jpg

PM me if interested. :)