View Full Version : DEX210 +8mm, DESC210r and DEST210r aluminum chassis
rcjunky
17-09-2012, 02:25 AM
Is there any interest in an aluminum chassis for the SC or ST? I'm also working on a +8mm aluminum chassis. I will be doing some serious testing with an aluminum SC chassis this comming weekend and see how it compares to the plastic one. Heres a pic before it gets the kick up bent tomorrow
http://i696.photobucket.com/albums/vv323/rcjunky1/IMG_2793.jpg
and a pic showing its extra length compared to a stock length peice (an easy way to confirm the hole locations)
http://i696.photobucket.com/albums/vv323/rcjunky1/IMG_2792.jpg
Post here or pm me if your interested in any of the 3 chassis, I'll probably only do 1 run of them (a total of about 50 chassis) so I want to get a ballpark of how many of each to make
jkclifford
17-09-2012, 02:42 AM
back to back tested against standard, with original set up no good. Lots of understeer.
Adjusted a few things to get some steering better but not as fast as the standard car.
awesome on the sweepers and getting on power, but struggled though the twisty bits.
Shelved and went back standard, but now thinking a brass front bulkhead........
jkclifford
17-09-2012, 02:45 AM
To note if your only using crap ally, don't machine out for the reciever wires.
Guess where it bends.
rcjunky
17-09-2012, 03:55 AM
Thats why the first bunch of testing will be with the SC chassis, if there's going to be any issues, it will happen with that chassis. In the event its not ridgid enough we do have an alternative plan to prevent any issues. These won't b for sale until after we've done some serious testing
rcjunky
20-09-2012, 03:30 AM
http://i696.photobucket.com/albums/vv323/rcjunky1/IMG_2795_zps1fd5105e.jpg
http://i696.photobucket.com/albums/vv323/rcjunky1/IMG_2796_zps6a41029c.jpg
http://i696.photobucket.com/albums/vv323/rcjunky1/IMG_2797_zps765646c3.jpg
Theres the SC chassis mounted on my buggy, it will be put on the SC truck and ran this weekend, will post back the results early next week.
/tobys
20-09-2012, 07:26 AM
Looks mentally long on the buggy! Limo Stylee :lol:
'caster master
06-02-2013, 05:32 PM
Hi are you still doing these? I would be interested in a +8mm chassis for the buggy. Also do you still use the kit body?
rcjunky
07-02-2013, 05:39 AM
yup, its still a work in progress. The buggy chassis are pretty much ready to go, the regular ones IMo are good, just waiting on some testing with the light weight version I've been working on. I'm running a finnisher body, but the kit also will work, it just doesn't line up nicely around the nose and had to re drill the front body mount so its a big slot now. The ST chassis should be good soon and I just need to get another SC chassis made to verify its 100% good to go. PM me if you want one, I'm trying to make a list of those who want one in chronological order to when I was pmed. As on now, I can sell the buggy chassis faster then I can get them, but I don't know how fast I can get them quite yet.
'caster master
07-02-2013, 06:58 PM
I would be interested in a lightweight +8mm alloy chassis for the dex210, let me know when you get it done! Also how much would it cost including postage to the UK. One more thing, is the finisher body the best fit, or could I cut my brand new uncut stock body to fit just as well, or is the durango +8mm cab forward body the best fit?
Thanks, Jon.
rcjunky
07-02-2013, 10:19 PM
any body will fit, just trim the nose section 8mm farther forward if possible, as well as the body mount hole. I'm very tempted on trying the +8mm TD body, I hear it handles better, and the body posts should line up
Jackal846
25-03-2013, 02:59 AM
How much are the chassis for the desc210r? Also will I need to assemble them at all?
rcjunky
25-03-2013, 03:55 AM
This project is still a work in project. Its a friend on mine working on it when he has time and lately has been doing more over time so progress has been slow. When they are available, it will be the chassis and spacers, possibly fasteners, so you'd just need the buggy side pods for the SC and ST chassis, everything else should bolt right up
av4625
26-03-2013, 11:57 PM
someone said if ur using crap alu it bends wer the receiver wire part is machined, if thats the case it is more flexable which will make the car even easier to driver and even worse in tight parts of the track
jkclifford
27-03-2013, 12:16 AM
someone said if ur using crap alu it bends wer the receiver wire part is machined, if thats the case it is more flexable which will make the car even easier to driver and even worse in tight parts of the track
in theory yes, but flex is minimal movement which the returns to normal position. Bent is just bent. Or as we say in rc tweaked!!
rcjunky
27-03-2013, 02:55 AM
I have never had durability issues any were even close to the milled section, if fact the LW version is milled even more with no issues there.
http://i696.photobucket.com/albums/vv323/rcjunky1/IMG_3082.jpg
The only issues I've had are at my home track, myself an a couple other running these chassis have bent the kick up area, that being said I've bent the stocker as bad if not worse before, but no one else has had any issues with durability. I've been looking into ageing to try fixing that issue that mysef and locals are having
av4625
27-03-2013, 09:49 PM
in theory yes, but flex is minimal movement which the returns to normal position. Bent is just bent. Or as we say in rc tweaked!!
But what im trying to say is if u just wanted to c wat the longer chassis did u need the alu to hav the same flex as the original because if it has more flex you are now changing two varibles!
rcjunky
28-03-2013, 04:57 AM
the flex on the original and an un milled +8mm is basically the same, more flex with the milled light weight one.
cliffhanger
28-07-2013, 06:29 AM
Do you have any for DESC210R?
rcjunky
30-07-2013, 12:04 PM
This si still a work in progress but no progress has been made for a bit. The machinist is still catching up on a couple jobs so this has been moved to the back burner.
OneKiwi
30-07-2013, 12:45 PM
Is it still only +8 or are you doing a +11 for the 210?
rcjunky
01-08-2013, 03:26 AM
Mostly +8mm but a couple +10mm have been made. due to the small scale its being done in, almost any length is possible, could do a +83.7mm if you wanted :P Not sure when more progress will be made, but am in contact with another company to possibly get them made quicker.
Danosborne6661
01-08-2013, 08:20 AM
££££?
Are these lighter or heavier than kit? Could be after a +8!
Origineelreclamebord
01-08-2013, 12:46 PM
I'm also curious about price... In the long(er) term I'd like to switch to a longer chassis, but only when I'm not paying kit prices :p
rcjunky
02-08-2013, 03:54 AM
The normal +8mm was the same, the LW option is about 20% lighter with more flex (yet still consistant) price will be about $80-100 canadian. Nothing is 100% yet or finalized so no exact numbers yet.
Dickchucksteve
06-08-2013, 10:36 PM
I've been looking for a good stadium truck chassis for a while, I'm tired of breaking these plastic chassis. And team-Durango won't get back to me when I ask about up graded chassis for the truck. How much for one?
Dickchucksteve
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.