PDA

View Full Version : X-6 Xtras


chris68nufc
25-05-2008, 08:19 PM
Really considering getting an X6 now. They look really good at South Shields. I have asked this before to Dan Greenwood but have deleted the PM.Doh! If i buy the X6 Conversion, what else will i need to get it the same as the team drivers cars? I dont want to get it just to find out that i need to spend another X-ammount of pounds on it to get it going.

Cheers

Chris

Cockerill
25-05-2008, 08:30 PM
On my car I run Losi Shocks, E-Speed Hangers, Bk2 Stub Axles. I think that's it for 'performance' extras. I also use Carbon anti-squat shimz for Glenn 'cos there easier.


If I think of anything else I'll add it.

jasonrcb
25-05-2008, 08:34 PM
there good as they come out of the box but the extras i have put on mine is
the e speed parts
k factory front shock tower
losi bk2 rear axles
rayspeed rear hubs

cant think of anything else that you need but im sure someone will remember something that i have forgotten

Chequered Flag Racing
25-05-2008, 09:09 PM
Really considering getting an X6 now. They look really good at South Shields. I have asked this before to Dan Greenwood but have deleted the PM.Doh! If i buy the X6 Conversion, what else will i need to get it the same as the team drivers cars? I dont want to get it just to find out that i need to spend another X-ammount of pounds on it to get it going.

Cheers

Chris

78t spur as 81t just touches the drive pins in the outdrives.

may need to dremel the chassis a little to get your servo in.

dremel a bit of the chassis away to make it easier to get to the lower motor fixing screw


looks like DMS is going to be busy again :D

ben
25-05-2008, 09:12 PM
I got an X6 today :thumbsup:

Chequered Flag Racing
25-05-2008, 09:13 PM
I got an X6 today :thumbsup:

with or with out Shimz?

bigred5765
25-05-2008, 09:15 PM
awsome ben glad you did the math

ben
25-05-2008, 09:17 PM
with or with out Shimz?

With the shims :eh?:

ben
25-05-2008, 09:17 PM
awsome ben glad you did the math

Im sure its gonna add up :woot:

rcracer
25-05-2008, 09:18 PM
With the shims :eh?:

yes Ben the shimz :woot:

ben
25-05-2008, 09:34 PM
all right all right dont get too excited haha :lol:.

rcracer
25-05-2008, 09:36 PM
there really good you can use the as little moustaches so you can get served in the pub :)

mattym0310
25-05-2008, 09:38 PM
spoke to you about this today :)
Tom has just about covered it I think. They arnt essential but I would get the shorter rear turnbuckles. Tom uses them and I understand Dan does too? Only get these if you get the Espeed camber link hangers.
If I think of anything else I will post here :D

ben
25-05-2008, 09:48 PM
there really good you can use the as little moustaches so you can get served in the pub :)

How random.....

Mike Hudson
25-05-2008, 10:02 PM
hahaha, well the X6 certainly seemed to be the car to have today at south shields as Ben found out and others:thumbsup: you gotta have some nortech bling on the X6 :drool:

Darren Boyle
25-05-2008, 11:51 PM
looks like DMS is going to be busy again


I checked the orders from the weekend on our online shopping cart admin and there are already 6 X6's pre-ordered to go out on tuesday, and that is if we dont sell any more tommorow since we are closed for the bank holiday!! Better set my alarm clock early for tuesday .......

Thanks guys...:thumbsup:

Chequered Flag Racing
26-05-2008, 07:08 AM
there are already 6 X6's pre-ordered

think I have enough Shimz in stock to cover that http://www.oople.com/forums/images/icons/icon14.gif ;)

Darren Boyle
26-05-2008, 10:31 AM
think I have enough Shimz in stock to cover that http://www.oople.com/forums/images/icons/icon14.gif ;)
All good, everyone is happy then......

super__dan
26-05-2008, 12:10 PM
Dificult to put an order on priotrity of upgrades but if you had a gun to my head;

Most importantly get the LATEST SPEC CAR (4 gear tranny, carbon rear tower etc)!
E Speed hangers / 78 spur / BK2 axles
Losi shocks
E Speed T piece

Not performance improving but nice to have are;
Carbon shims
B4 (or whatever) servo mounts (sorry Chazz)

Darren Boyle
26-05-2008, 12:17 PM
Dan, I think that about sums it up in the order that people have been asking for stuff, except for those wanting the "poser" bits like the K Factory front tower and Rayspeed rear hubs (neither of which are essential)

super__dan
26-05-2008, 12:34 PM
I don't run either of those so wouldn't be fair to comment, I've never had any issues with front tower, normally change as the top looks scabby not that I break them, do run plastic though.

Always keep meaning to get the rear hubs but never seem to get round to them, also have loads of spares of stock ones ;)

Chrislong
26-05-2008, 12:44 PM
Im running the Rayspeed rear hubs. Not long ago I let Tom race my X-6 while he was building his own, and he put the stock B4 hubs on it. When i got it back the car just didn't go well, so put the Rayspeed hubs back on and the car felt more like how I like it to again, possibly due to the lower ballstud position than the stock hubs.

I think having Rayspeed or Racers edge hubs is as important as the E-speed hangers in my opinion.

burgie
26-05-2008, 07:21 PM
i have taken the e-speed hangers off mine - i didn't like the "twitchy" feeling they gave the car - i do run the trinity blue hubs on the back though, and they make the car "feel" better.

Al3xis007
03-06-2008, 05:20 PM
so i just bought the x 6 conversion for my boy darren at dms.

i run the xx4 and i want to keep the 3-3 saddle set up. i've seen the 3-3 set up on the 'rc racer' test car does anyone know if i bought the 3-3 or 4-2 chassis???????

thanks

Chequered Flag Racing
03-06-2008, 05:28 PM
so i just bought the x 6 conversion for my boy darren at dms.

i run the xx4 and i want to keep the 3-3 saddle set up. i've seen the 3-3 set up on the 'rc racer' test car does anyone know if i bought the 3-3 or 4-2 chassis???????

thanks

all X6 chassis are 2x4 from the factory

the 3x3 'rc racer' must be a modded kit chassis or home made jobby

any pics of the 'rc racer' chassis

Al3xis007
03-06-2008, 05:31 PM
yeah the current racer mag july 08, it should be on their website

Al3xis007
03-06-2008, 05:34 PM
oops im an idiot, its in the middle of the two pages so it looks like 3-3

Chequered Flag Racing
03-06-2008, 05:50 PM
yeah the current racer mag july 08, it should be on their website

mentions it but pics

We grabbed our opportunity to build up one of the latest spec kits along with some option parts

they didn't get in touch about the anti squat Shimz :(

Gnarly Old Dog
04-06-2008, 12:08 PM
mentions it but pics



they didn't get in touch about the anti squat Shimz :(



Just sending you a PM...

Chequered Flag Racing
04-06-2008, 04:35 PM
mentions it but pics

they didn't get in touch about the anti squat Shimz :(

they have now :thumbsup: