PDA

View Full Version : 410 motor


lordnikon
02-10-2012, 02:28 PM
What does everyone run in their 410's ?? I tend to favour running a lower turn and less boost to keep everything cooler but dont want to over do it. Had my eye on a 6.5T but not sure if this is enough ??

Chris-S
02-10-2012, 02:37 PM
6.5 turn will be fine.

Jason A
02-10-2012, 02:39 PM
I run an lrp x20 6.5 and its very fast more than enough and it can still have bit turbo added for very long straights

GRIFF55
02-10-2012, 03:14 PM
6.5 speed passion with STD speedo settings and it's still a rocket mate!

RichyUK
02-10-2012, 03:47 PM
6.5 in mine and its a missile!

lordnikon
02-10-2012, 05:00 PM
Cheers chaps. 6.5 it is.

burgie
02-10-2012, 05:26 PM
What gearing/cells are you guys running with the 6.5's?

RichyUK
02-10-2012, 05:40 PM
What gearing/cells are you guys running with the 6.5's?

think i'm 87/20 on turnigy nano tech 5100 cells

Jason A
02-10-2012, 05:53 PM
18/87 and Orion 90c saddles

lordnikon
02-10-2012, 06:12 PM
I'm going for a 21/87 with mine :D

mattr
02-10-2012, 07:06 PM
I'm going for a 21/87 with mine :DSame as i usually run, using the orion 90c/5500mAh cells.

/tobys
02-10-2012, 08:19 PM
22 or 23 for me on a Reedy 6.5

hotrodchris
02-10-2012, 08:26 PM
I'm going for a 21/87 with mine :D


you will need to go a couple of teeth higher at Torch or it wil run out of legs on the straight!:woot:

TonyM
03-10-2012, 08:27 AM
I ran a 5.5 Tekin. Way too much power - even for big tracks. 6.5 Tekin on 22/87 is what I now run.

HarlowS
03-10-2012, 08:52 AM
+1 on the Tekin 6.5:)

I ran a 5.5 Tekin. Way too much power - even for big tracks. 6.5 Tekin on 22/87 is what I now run.

Chris-S
03-10-2012, 01:38 PM
you will need to go a couple of teeth higher at Torch or it wil run out of legs on the straight!:woot:

Turbo timing :p

AmiSMB
03-10-2012, 03:07 PM
I run 5.5 SP V3 with 22/87 gearing with a Hobbywing 120A ESC. My older packs of lipo's have now swelled due the the power it draws :)

kartstuffer
04-10-2012, 08:13 AM
6.5 orion,24/87 with orion r10 base setup & orion 90c battery & it is smoother & cooler with this gearing than when running a lower pinion (seems wrong but it works)