changing from wheel to stick Transmitter.

[Nas]

Hi guys, i want to convert from wheel to stick, i run Spektrum dsm2 receivers on my cars.

What is the best stick receiver for £150.00 max,

Anything else important i need to know?

Any help is much appreciated.

Thanks.

[budfish]

Hi guys, i want to convert from wheel to stick, i run Spektrum dsm2 receivers on my cars.

What is the best stick receiver for £150.00 max,

Anything else important i need to know?

Any help is much appreciated.

Thanks.

I don't believe there is one sub £200 I think the futaba 3gr is good for the money £189

All the rest are way over £200 and the circa £75 etronix,code etc etc are all the same units with different badges on I've had a code handset when they first came out and found it unpropoitional

[Nas]

Thanks for the advice,but getting futaba means changing all my receivers and thats too expensive.

Wouldn't a spektrum dx6i work?

http://www.kingslynnmodelshop.co.uk/p4481/Spektrum_DX6i_DSMX_%28Mode2%29_Tx_+_AR6115E_INSTOC K/product_info.html?utm_source=google&utm_medium=shopping&utm_campaign=xigen_shopping_feed&gclid=CNPCs_zN8bICFaXKtAodZTMA6g

[pro4nut]

It would work, but you will need to fiddle around inside to fit a return spring as the throttle is on a ratchett

[knighthawk]

Thanks for the advice,but getting futaba means changing all my receivers and thats too expensive.

Wouldn't a spektrum dx6i work?

http://www.kingslynnmodelshop.co.uk/p4481/Spektrum_DX6i_DSMX_%28Mode2%29_Tx_+_AR6115E_INSTOC K/product_info.html?utm_source=google&utm_medium=shopping&utm_campaign=xigen_shopping_feed&gclid=CNPCs_zN8bICFaXKtAodZTMA6g

Spektrum code their air and surface system different, so your rx won't work with a dx6i tx

[Nas]

Spektrum code their air and surface system different, so your rx won't work with a dx6i tx

"Compatible With Any Existing DSM And DSM2 Receivers"
Don't know if that is for the car receivers aswell though?
http://www.wheelspinmodels.co.uk/i/9624/

[Nas]

It would work, but you will need to fiddle around inside to fit a return spring as the throttle is on a ratchett

Yea i was just thinking about that actually,i reckon i could fit the return spring with no problems.Although a ratchett doesn't bother me too much.

[quincey]

Get a 2nd hand spektrum module and bung it in the back of a 2nd hand futaba 3vc/s or a futaba ff3 or sanwa/ok vantage..job done
My setup 3vc and module cost me £75 all in and I've had it for years and its never let me down..

[knighthawk]

"Compatible With Any Existing DSM And DSM2 Receivers"
Don't know if that is for the car receivers aswell though?
http://www.wheelspinmodels.co.uk/i/9624/


Yes but as I'm led to believe Spektrum code them !
DSM or DSM2 and DSMX are their types of modulation, like Futaba FASST or FHSS.

I also believe this subject has been asked before on oOple.

All Surface RX's begin with a code of SR****
All Air Type RX's begin with a code of AR****

[Plasmag]

Yea i was just thinking about that actually,i reckon i could fit the return spring with no problems.Although a ratchett doesn't bother me too much.

Hi Nasir, I have just had my DX6i open to have a look and it looks as though you can swop both joysticks over so giving you a spring return throttle and spring return steering, no need to do anything else. Unfortunately I do not have a land rx to try with it.

[Nas]

Thanks for that Plasmag. Much appreciated.

Thanks all for the advice.