View Full Version : How to shine carbon fibre
franki
14-10-2012, 06:10 PM
Hi what's the best way to clean carbon fibre up ???
Jordy
14-10-2012, 06:20 PM
I use Muc Off Silicone Shine.
Nice and shiny.....and smells of cherry!
http://www.ribblecycles.co.uk/sp/road-track-bike/Muc-Off-Silicone-Shine-Polish/MUCOLUBE355?utm_campaign=Googlebase&utm_medium=organic&utm_source=Googlebase
john333
14-10-2012, 06:33 PM
I worked at twr jaguar many years ago and there we would flat it down with ultra fine grade wet and dry, give it a couple of coats of clear lacquer then polish it with t cut.
Naushad
14-10-2012, 06:44 PM
I clean it down and then spray with GT85..
Jsmith24
14-10-2012, 06:46 PM
If you can get hold of epoxy resin, mix up a small amount. Dip the corner of paper towel in and gently wipe it across the carbon fibre. Then polish. Brings back the original shine with what is used originally. This will give a streak free finish. Literally a smear though, any more and it will pool up.
dodgydiy
14-10-2012, 09:15 PM
t cut or rubbing compound to clean it then polish with a good car polish, dont expect your servo tape to stick well afterwards though!
androo
14-10-2012, 09:42 PM
You need to get your hands on a product called mono coat by amber composites or maybe chem trend. It's used as a sealer for carbon but you get a good shiny finish after applying a few coats. Using clear lacquer you might find the carbon might discolour over time.
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.