View Full Version : Schumacher cougar Sv2
braddaz
01-11-2012, 09:15 PM
Hi All ,
Need a bit of help with a sv2 the steering servo arm is extremely close to the bell crank of the steering , i had a problem when i raced with it getting caught and locking up one way, are they all this close i have a standard alturn servo fitted
thanks
Braddas
mark christopher
01-11-2012, 09:19 PM
Picture would help!
braddaz
01-11-2012, 09:33 PM
yeah that might help better lol
thanks
Braddas
gainsy
01-11-2012, 09:45 PM
You just need a shorter ball stud on the horn, should be this one on it
http://www.racing-cars.com/pp/Old_Cars_and_Parts/Mi-3/U2722.html
When fitted it is almost flush to the nut
hth
http://i1088.photobucket.com/albums/i322/gainsy73/DSC_1159.jpg
braddaz
01-11-2012, 10:06 PM
Thanks Gainsy
think i need a different servo horn the one on yours is offset backwards quite a bit compared to mine ,how much gap is between servo arm an bell crank in straight ahead position ?
mark christopher
01-11-2012, 10:41 PM
I don't think you have a Schumacher servo horn on http://www.rccarshop.co.uk/index.php/spares/servo-horns-2688.html
gainsy
01-11-2012, 11:15 PM
Thanks Gainsy
think i need a different servo horn the one on yours is offset backwards quite a bit compared to mine ,how much gap is between servo arm an bell crank in straight ahead position ?
About 3mm gap with wheels straight
braddaz
02-11-2012, 04:42 PM
Hi
went and bought a proper servo arm today and fitted it problem now sorted thanks to everybodies input , sure i should of got one in kit when i built it though , my kit from a sealed box was missing quite a few bits so didnt notice that it may have been missing.
thanks again everyone
braddaz
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.